678541
8
Zoom out
Zoom in
Previous page
1/20
Next page
Save a radio station on a displayed station key
Continue to press one of the six station keys
1 ...
to
6 ...
displayed in the RADIO
main menu until a signal tone sounds. The currently heard radio station is then
stored on this station key.
Deleting a radio station from the memory list
In the RADIO main menu, press the function key
Presets
to open the memory
list.
Press the function key
Delete
behind the station you wish to delete.
Confirm the following safety interrogation by pressing the function key
Delete
to finally remove the station from the memory list.
If the currently heard radio station is already saved in the preset list, the memory
space number is displayed behind the description of the frequency range (FM or
AM).
Use the Setup radio main menu, to determine which of the six station keys are to
be displayed in the main menu RADIO.
Ð
Function SCAN
The stations of a waveband can be played briefly one after the other (for ten sec-
onds).
Press the set button
2
, the radio searches automatically all available stations
of the current waveband.
Alternatively, press the function key
Extras
and press
Scan
in the opening pop-
up window.
During the current automatic play the function key will change from
Extras
to
Scan
.
Press the set button
2
or function key
Scan
again to end the automatic play
of the currently heard radio station.
Ð
RDS functions
Switching radio text on and off
In the RADIO main menu, press the function key
Extras
and then the function
key
Radio text
. Instead of the six station keys, the window for displaying the ra-
dio text is now opened in the lower half of the display.
The window for displaying the radio text must fade out again to enable the sta-
tion keys to be displayed again. Briefly press on the display window of the radio
text.
Alternatively, press the function key
Extras
and the function key
Radio text
shown as highlighted in the opening pop-up window.
RDS (“Radio Data System”) serves to transmit program identification and addi-
tional services therefore also enabling automatic tracking of stations.
In the event of sufficiently satisfactory reception, the suitable RDS radio stations
will display the station name instead of the station frequency.
If a radio station sends additional information via the RDS function while a station
is being stored, it can occur that the name of the radio station is later displayed
incorrectly in the preset list.
Ð
Traffic information function
Press on the button
TP
, in order to switch the traffic information function on or
off.
The display “TP” in combination with a station name (e.g. in the station or preset
list), indicates a traffic programme station.
Irrespective of which radio station is heard, an additional receiver part in the unit
ensures that a traffic programme station can always be received as long as the
traffic programme function is switched on.
The operational readiness of the traffic information function is indicated by “TP
at the top right in the display.
If no traffic programme station can be received because, for example, radio recep-
tion is interrupted in general, “No TP” will be displayed instead of “TP”. Remem-
ber that car parks, tunnels, high buildings or mountains can interrupt the radio
signal up to the total loss of reception.
Incoming traffic announcement
When a traffic announcement is being received, a pop-up window will open.
If you wish to interrupt the transmission of the traffic announcement, press on
the function key
Cancel
in the pop-up window Traffic announcement. The traffic
programme function remains available and a following traffic announcement is
made again while the audio mode is in operation. Pressing the function key
Deact. TP
will switch off the traffic programme function permanently.
Ð
6
Basic setting
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skoda BOLERO - 2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skoda BOLERO - 2012 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Skoda BOLERO - 2012

Skoda BOLERO - 2012 User Manual - German - 21 pages

Skoda BOLERO - 2012 User Manual - Dutch - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info