678445

Skoda BOLERO - 2011 Manual

8
Zoom out
Zoom in
Previous page
1/23
Next page
The process of searching for and storing the radio stations
Manual search
– Turn the Set button
2
in the RADIO main menu or press on the function key
Man.
. The scale of the selected frequency range is inserted in the frequency
band in the lower part of the touch-screen.
– Briefly press the set button to terminate the manual frequency selection and
to display once again the function keys.
Save a radio station on a displayed station key
– Continue to press one of the six station keys
1 ...
to
6 ...
displayed in the RADIO
main menu until a signal tone sounds. The currently heard radio station is then
stored on this station key.
Deleting a radio station from the memory list
– In the RADIO main menu, press the function key
Memory
to open the memory
list.
– Press the function key
Delete
behind the station you wish to delete.
– Confirm the following safety interrogation by pressing the function key
Delete
to finally remove the station from the memory list.
If the currently heard radio station is already saved in the preset list, the memory
space number is displayed behind the description of the frequency range (FM or
AM).
Use the Setup Radio main menu, to determine which of the six station keys are to
be displayed in the main menu RADIO.
Ð
Function SCAN
The stations of a waveband can be played briefly one after the other (for ten sec-
onds).
– Press the set button
2
, the radio searches automatically all available stations
of the current waveband.
– Alternatively, press the function key
Extras
and press
Scan
in the opening pop-
up window.
– During the current automatic play the function key will change from
Extras
to
Scan
.
– Press the set button
2
or function key
Scan
again to end the automatic play
of the currently heard radio station.
Ð
RDS functions
Switching radio text on and off
– In the RADIO main menu, press the function key
Extra
and then the function
key
Radio Text
. Instead of the six station keys, the window for displaying the
radio text is now opened in the lower half of the display.
– The window for displaying the radio text must fade out again to enable the
station keys to be displayed again. Briefly press on the display window of the
radio text.
– Alternatively, press the function key
Extras
and the function key
Radio text
shown as highlighted in the opening pop-up window.
RDS (“Radio Data System”) serves to transmit program identification and addition-
al services therefore also enabling automatic tracking of stations.
In the event of sufficiently satisfactory reception, the suitable RDS radio stations
will display the station name instead of the station frequency.
If a radio station sends additional information via the RDS function while a station
is being stored, it can occur that the name of the radio station is later displayed
incorrectly in the preset list.
Ð
Traffic information function
– Press on the button
TP
, in order to switch the traffic information function on
or off.
The display “TP” in combination with a station name (e.g. in the station or preset
list), indicates a traffic programme station.
Irrespective of which radio station is heard, an additional receiver part in the unit
ensures that a traffic programme station can always be received as long as the
traffic programme function is switched on.
The operational readiness of the traffic information function is indicated by “TP”
at the top right in the display.
6 Basic setting
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skoda BOLERO - 2011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skoda BOLERO - 2011 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Skoda BOLERO - 2011

Skoda BOLERO - 2011 User Manual - German - 24 pages

Skoda BOLERO - 2011 User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info