482566
4
Zoom out
Zoom in
Previous page
1/68
Next page
4
Blower/vacuum 8600
INTRODUCTION
• Thistoolhasbeendesignedforblowingandvacuuming
materials that are not hazardous to one’s health
• Thistoolisnotsuitableforblowingandvacuuming
flammable materials, metal chips and sharp objects
(such as screws or nails)
• Thistoolisnotintendedforleafblowingand
outdoor use
• Thistoolisnotintendedforprofessionaluse
• Readthisinstructionmanualcarefullybeforeuse
andsaveitforfuturereference3
• Payspecialattentiontothesafetyinstructionsand
warnings;failuretofollowthesemayresultin
seriousinjury
TECHNICALSPECIFICATIONS1
TOOL ELEMENTS 2
A On/offswitch
B Buttonforswitchlocking
C Nozzle
D Air outlet
E Air inlet
F Dust bag
G Airflow regulator
H Ventilation slots
J Nameplate
SAFETY
GENERAL
• Onlyusethetoolindaylightorwithappropriatearticial
lighting
• Provideforgoodventilationattheworkingplace
• Neveroperatethetoolinthedirectvicinityofpersons
(especiallychildren)andanimals
• Theuserisresponsibleforaccidentsorhazards
occurringtootherpeopleortheirproperty
• Alwaysdisconnectplugfrompowersource
- wheneverleavingthetoolunattended
- beforeclearingjammedmaterial
- beforechecking,cleaningorworkingonthetool
- wheneverthetoolstartsvibratingabnormally
• Storethetoolindoorsinadryandlocked-upplace,out
ofreachofchildren
PERSONALSAFETY
• Thistoolisnotintendedforusebypersons
(includingchildren)withreducedphysical,sensory
ormentalcapabilities,orlackofexperienceand
knowledge,unlesstheyhavebeengivensupervision
orinstructionconcerninguseofthetoolbyaperson
responsiblefortheirsafety
• Ensurethatchildrendonotplaywiththetool
• Neverallowchildrenorpeoplewhoarenotfamiliarwith
the operating instructions to use the tool (local
regulationscanrestricttheageoftheoperator)
• Neverblowdebrisinthedirectionofbystanders
• Donotblowandvacuummaterialsthatare
hazardoustoone’shealth(suchasdustfrombeech
oroakwood,masonrydust,asbestos)
• Donotwearlooseclothingorjewelrythatcanbedrawn
intotheairinlet;keeplonghairawayfromtheairinlet
• Thenoiselevelwhenworkingcanexceed85dB(A);
wear ear protection
• Wearadustmaskwhenworkinginadustyenvironment
• Alwaysdisconnectplugfrompowersourceduringwork
breaksorbeforecleaning,maintenance,making
adjustments and changing accessories, in order to
reducetheriskofstartingthetoolaccidentally
ELECTRICALSAFETY
• Alwayscheckthatthesupplyvoltageisthesameas
thevoltageindicatedonthenameplateofthetool
• Whenoperatingthetoolusearesidualcurrentdevice
(RCD)withatriggeringcurrentof30mAmaximum
• Donotblowandvacuumliquids(thepenetrationof
liquidsincreasestheriskofanelectricshock)
• Keepthetoolawayfromrainormoisture (the
penetrationofwaterintothemotorincreasestheriskof
an electric shock)
• Usecompletelyunrolledandsafeextensioncordswith
acapacityof16Amps(U.K.13Amps)
• Onlyuseanextensioncordwhichisequippedwitha
watertight plug and coupling-socket
• Inspecttheextensioncordperiodicallyandreplaceit,
ifdamaged(inadequateextensioncordscan
bedangerous)
• Alwaysswitchofftoolanddisconnectplugfrompower
sourceifthepowersupplycordortheextensioncordis
cut, damaged or entangled (donottouchthecord
beforedisconnectingtheplug)
• Donotdriveover,crushorstretchthecord
• Neverusethecordforcarrying,pullingorunplugging
the tool
• Neverusethetoolwhencordisdamaged;haveit
replacedbyaqualiedperson
BEFOREUSE
• Befamiliarwiththecontrolsandtheproperuseof
the tool
• Checkthefunctioningofthetoolbeforeeachuseand,
incaseofadefect,haveitrepairedimmediatelybya
qualiedperson;neveropenthetoolyourself
• Whenvacuuming,neverusethetoolwithoutthe
dustbag in place
• Regularlycheckthedustbagforwearordamage
• Replacewornofdamagedparts
DURING USE
• Alwayskeepthecordawayfrommovingpartsofthe
tool;directthecordtotherear,awayfromthetool
• Alwaysensurethattheventilationopeningsarekept
clearofdebris
• Takeasecurestancewhenworking(donotoverreach,
especiallywhenusingstepsoraladder)
EXPLANATIONOFSYMBOLSONTOOL
3Readtheinstructionmanualbeforeuse
4Wearprotectiveglasses
5 Double insulation (no earth wire required)
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 8600 AA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 8600 AA in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info