591209
9
Zoom out
Zoom in
Previous page
1/156
Next page
9
OTHER APPLICATION EXAMPLE:
removing (synthetic) wall covering
Removing paint/lacquer next to glass !
- always use glass protection nozzle G when working
next to glass
- remove the paint with a hand scraper
! do not use the tool for removing paint on
metal-framedwindows;metalisheat-conducting
which might lead to breaking of the glass
Removing stickers (use at nozzle H) @
- many adhesives become softer when heated, allowing
adhesive bonds to be separated and superuous
adhesive to be removed
! heat sticker on the upper side
! always take care not to overheat the underlying
surface
OTHER APPLICATION EXAMPLES:
removing linoleum and vinyl carpeting
removing carpet tiles made of synthetic bres
removing veneers/applying veneer strips
softening/melting tar, tin, bitumen, wax (use at nozzle H)
waxing (skis, furniture) (use at nozzle H) #
removing resin
loosening rusty/too tightly fastened metal screws, nuts
and bolts
removing candle wax (do not overheat the
underlying surface)
repairing broken candles/restoring bent candles to
their original shape
Shrink tting $
- use reector nozzle J or reduction nozzle K
- select a shrink-t tube with a diameter matching that of
the workpiece
- heat the shrink-t tube evenly
OTHER APPLICATION EXAMPLE:
shrink-wrapping
Soldering water pipes %
This tool is most suitable for working with soft solders
(melting point below 400°)
- use reector nozzle J
- thoroughly clean both joining sections before soldering
- pre-heat both sections and apply soldering wire (do
not use lead-based soldering wire)
Thawing out frozen water pipes ^
- use reector nozzle J
- heat the frozen area evenly
! water pipes are often difficult to distinguish from
gaspipes;heatinggaspipesisextremely
dangerous – risk of explosion
OTHER APPLICATION EXAMPLES:
thawing out water pipes made of PVC (position I,
max. 60°C)
thawing out frozen car locks (position I, max. 60°C)
(use reduction nozzle K)
defrosting freezers (do not damage the plastic
housing)
thawing out ice-covered steps and pavements
Shaping plastic tubes
- use reector nozzle J
- ll the tube with sand and seal it at both ends, to avoid
kinking of the tube
- heat the tube evenly by moving it from side to side
OTHER APPLICATION EXAMPLES:
shaping all plastics with a low melting-point
(polyethylene, PVC etc.)
shaping all plastics with a high melting-point (acrylic
glass, Plexiglas etc.)
shaping and bending carpet tiles made of synthetic
bres
shaping and bending of wood (model-building)
Welding plastics
- the weld seam must be clean and grease-free
- keep welding rod close to weld seam and apply heat,
until the welding rod gets tacky
- remove heat, when weld seam is lled up
OTHER APPLICATION EXAMPLES:
repairing of surfboards, skis and other synthetic sports
goods (use at nozzle H)
welding PVC-materials
smoothing blisters after sticking PVC-labels
connecting garden hoses (use reector nozzle J)
Drying
! only dry with a low or medium temperature
setting (position 1 or 2) and with an increased
distance between the tool and the workpiece
- drying of paint, varnish, gypsum, mortar and plaster
- drying wet timber prior to lling
- drying thickly applied ller or adhesive quickly
- drying building joints before spraying insulation or
sealant
- drying joints and cracks in boatbuilding
Cleaning/disinfecting
- disinfecting rabbit hutches, dove cotes, etc. (remove
your pet first)
- combatting ant colonies
- combatting woodworms and boring beetles (hold the
tool at an adequate distance from the wood)
- eliminating weeds
MAINTENANCE / SERVICE
This tool is not intended for professional use
Always keep tool and cord clean (especially ventilation
slots F 2)
Never use easy inammable liquids for cleaning the heat
gun in general and the air outlet/nozzle in particular
If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should be
carried out by an after-sales service centre for SKIL
power tools
- send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of
the tool are listed on www.skil.com)
ENVIRONMENT
Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
- in observance of European Directive 2012/19/EC on
waste of electric and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their life
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 8004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 8004 in the language / languages: All languages as an attachment in your email.

The manual is 9,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info