644817
7
Zoom out
Zoom in
Previous page
1/108
Next page
7
Sharpening of accessories
- with sharp accessories, good working performance
and a long service life can be achieved
- sharpen the steel accessories before they come dull
APPLICATION ADVICE
Use accessory G for working on hard materials 6
! soft materials (such as wood and aluminium) can
be easily damaged with extra sharp blades
Possible applications are:
- removal of carpet adhesive and foam-, plaster-,
mortar- remains as well as remains of joint material
- smoothing of unevennesses
- removal of oor coverings
! hold the tool firmly with both hands and take a
secure stance
Use accessory H for working on soft materials 7
Possible applications are:
- removal of paint residue, silicon and plaster as well as
stucco from glass and plastic panels
- smoothing and removing of adhesive and sealing
residues from wooden ooring
Use accessory J for carving work 8
- carving is possible only in wood with short bres (such
as linden and poplar)
! hold the tool firmly with both hands and take a
secure stance
Use accessory K for removing sealing from window joints
or remains from door rabets 9
MAINTENANCE / SERVICE
Always keep tool and cord clean (especially ventilation
slots F 3)
- clean the tool with a dry, soft cloth (do not use cleaning
agents or solvents)
! disconnect the plug before cleaning
Keep tool as well as accessories free from adhesives or
any other residuary material
Always store the tool indoors in its protective carton/case
If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should be
carried out by an after-sales service centre for SKIL
power tools
- send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of
the tool are listed on www.skilmasters.com)
ENVIRONMENT
Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
- in observance of European Directive 2012/19/EC on
waste of electric and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol 0 will remind you of this when the need for
disposing occurs
DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product
described under “Technical data” is in conformity with the
following standards or standardization documents: EN
60745, EN 61000, EN 55014, in accordance with the
provisions of the directives 2004/108/EC, 2006/42/EC,
2011/65/EU
Technical file at: SKIL Europe BV (PT-SEU/ENG1),
4825 BD Breda, NL
¹ÊÁÂÆιÆ¼½ÊÇǾ¼½Æ
ȽʹÌÁÇÆËŵÆ¿Áƽ½ÊÁÆ¿
ÍÊÇȽƓˁ˅ʿ˂ʽ¼¹Ɠ
Ĺ¾ÁÂÿʹ¹¾
ÈÈÊÇιÄ¹Æ¹¿½Ê
23.12.2013
NOISE/VIBRATION
Measured in accordance with EN 60745 the sound
pressure level of this tool is 81 dB(A) and the sound
power level 92 dB(A) (standard deviation: 3 dB), and the
vibration 12.7 m/s² (hand-arm method; uncertainty
K = 1.5 m/s²)
The vibration emission level has been measured in
accordance with a standardised test given in EN 60745; it
may be used to compare one tool with another and as a
preliminary assessment of exposure to vibration when
using the tool for the applications mentioned
- using the tool for dierent applications, or with dierent
or poorly maintained accessories, may signicantly
increase the exposure level
- the times when the tool is switched o or when it is
running but not actually doing the job, may signicantly
reduce the exposure level
! protect yourself against the effects of vibration
by maintaining the tool and its accessories,
keeping your hands warm, and organizing your
work patterns
Grattoir 7720
INTRODUCTION
Cet outil est conçu pour ôter/gratter les éléments
détritiques des revêtements ainsi que les résidus de
colles et de matériaux de remplissage, pour lisser les
irrégularités et pour des travaux de creusement dans du
bois tendre
Lisez et conservez ce manuel d’instruction 2
CARACTERISTIQUES TECHNIQUES 1
ELEMENTS DE L’OUTIL 3
A Interrupteur de marche/arrêt et réglage de vitesse
B Indicateur de la vitesse sélectionnée
C Interrupteur pour verrouiller les accessoires
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 7720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 7720 in the language / languages: All languages as an attachment in your email.

The manual is 6,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info