758399
8
Zoom out
Zoom in
Previous page
1/108
Next page
8
(such as oak and beech dust) especially in conjunction
with additives for wood conditioning; 

connectable
Follow the dust-related national requirements for the
materials you want to work with
Wear protective gloves, safety glasses, close-tting
clothes and hair protection (for long hair)
 (a workpiece clamped with
clamping devices or in a vice is held more securely than
by hand)
When sanding metal, sparks are generated; do not
use dust box and keep other persons and combustible
material from work area
DURING USE
Always keep the cord away from moving parts of the tool;
direct the cord to the rear, away from the tool
Do not touch the moving sanding sheet
In case of electrical or mechanical malfunction,
immediately switch o the tool and disconnect the plug
If the cord is damaged or cut through while working, do
not touch the cord, but immediately disconnect the plug
AFTER USE
When you put away the tool, switch o the motor and
ensure that all moving parts have come to a complete
standstill
EXPLANATION OF SYMBOLS ON TOOL
3 Read the instruction manual before use
4 Double insulation (no earth wire required)
5 Do not dispose of the tool together with household waste
material
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
Do not connect the blue (= neutral) or brown (= live) wire
in the cord of this tool to the earth terminal of the plug
If for any reason the old plug is cut o the cord of this tool,
it must be disposed of safely and not left unattended
USE
Backing pads
-never run the tool without backing pad A
! replace damaged backing pads immediately

! unplug tool before removing/mounting backing
pads
Mounting of sanding sheet 6
-mount VELCRO sanding sheet C as illustrated
-if necessary, clean backing pad rst
! perforation in sanding sheet should correspond

! the dust suction requires the use of perforated
sanding sheets
! 
Dust suction
! 
sanding metal
Dust box 7
-empty dust box D regularly for optimal dust pick-up
performance
-remove dust box D by pulling dust box D backwards
For using vacuum cleaner
-mount vacuum cleaner adapter E as illustrated 8a
-connect vacuum cleaner hose to vacuum cleaner
adapter E 8b
d) 


Power tools are dangerous in the hands of untrained
users.
e) 
misalignment or binding of moving parts, breakage


tool repaired before use. Many accidents are caused
by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g) 


performed. Use of the power tool for operations dierent
from those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
5) SERVICE
a) 
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
SAFETY INSTRUCTIONS FOR SANDERS
GENERAL
This tool should not be used by people under the age of
16 years
This tool is not suitable for wet sanding
Never use the tool when the cord is damaged; it must be
replaced by a specially prepared cord available through
the service organization.
 (asbestos
is considered carcinogenic)

making any adjustment or changing any accessory
ACCESSORIES
SKIL can assure awless functioning of the tool only
when original accessories are used
Do not continue to use worn, torn or heavily clogged
sanding sheets
BEFORE USE
Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the tool
Avoid damage that can be caused by screws, nails and
other elements in your workpiece; remove them before
you start working
Use completely unrolled and safe extension cords with a
capacity of 16 Amps (U.K. 13 Amps)
The noise level when working can exceed 85 dB(A); wear
ear protection
Dust from material such as paint containing lead, some
wood species, minerals and metal may be harmful
(contact with or inhalation of the dust may cause allergic
reactions and/or respiratory diseases to the operator or
bystanders); 

Certain kinds of dust are classied as carcinogenic
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 7471 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 7471 in the language / languages: All languages as an attachment in your email.

The manual is 5,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info