591196
7
Zoom out
Zoom in
Previous page
1/104
Next page
7
DECLARATION OF CONFORMITY
Orbital sander 7445/7455
Technical data
1
 We declare under our sole responsibility that the product
described under “Technical data” is in conformity with
the following standards or standardization documents:
EN 60745, EN 61000, EN 55014, in accordance with the
provisions of the directives 2014/30/EU, 2006/42/EC,
2011/65/EU
 : SKIL Europe BV (PT-SEU/ENG1),
4825 BD Breda, NL
16.05.2013
SKIL Europe BV, 4825 BD Breda, NL
Marijn van der Hoofden
Operations & Engineering
Olaf Dijkgraaf
Approvals Manager
13
19.09.2014
NOISE/VIBRATION
 Measured in accordance with EN 60745 the sound
pressure level of this tool is 82 dB(A) and the
sound power level 93 dB(A) (standard deviation: 3
dB), and the vibration 7.8 m/s² (triax vector sum;
uncertainty K = 1.5 m/s²)
 The vibration emission level has been measured in
accordance with a standardised test given in EN 60745;
it may be used to compare one tool with another and as
a preliminary assessment of exposure to vibration when
using the tool for the applications mentioned
- using the tool for dierent applications, or with dierent
or poorly maintained accessories, may signicantly
increase the exposure level
- the times when the tool is switched o or when it is
running but not actually doing the job, may signicantly
reduce the exposure level
! 
by maintaining the tool and its accessories,
keeping your hands warm, and organizing your
work patterns
Ponceuse excentrique 7445/7455
INTRODUCTION
 Cet outil est conçu pour le ponçage à sec du bois,
plastique, métal et mastic et des surfaces peintes
 Cet outil n'est conçu pour un usage professionnel
 Lisez et conservez ce manuel d’instruction
3
CARACTERISTIQUES TECHNIQUES
1

2
A Support plateau
B Vis du support plateau
C Feuille de ponçage
D Réservoir à poussière
E Bouton de retrait du réservoir à poussière
! 
from the workpiece
 Speed control
7
(7455)
For optimal sanding results on dierent materials
- with wheel J
2
you can set the desired sanding speed
- always adjust speed to grit size used
- before starting a job, nd the optimal speed and grit by
testing out on spare material
 Holding and guiding the tool
8
! 
coloured grip area(s)
- guide the tool parallel to the working surface and move
it in circles or in a cross pattern
- do not apply too much pressure on the tool; let the tool
do the work for you
- do not tilt the tool in order to avoid unwanted sanding
marks
- keep ventilation slots K
2
uncovered
 Sanding
- the amount of material removed is determined by
the selection of the sanding sheet, the preselected
sanding speed and the applied pressure
! 
to an increase of the sanding capacity, but to
increased wear of the tool and the sanding sheet
! never use the same sanding sheet for wood and
metal
APPLICATION ADVICE
 For determining the optimal grit (and speed), table
9
can be used as reference
! 
 For more tips see www.skil.com
MAINTENANCE / SERVICE
 This tool is not intended for professional use
 Always keep tool and cord clean (especially ventilation
slots K
2
)
- remove adhering sanding dust with a brush
! disconnect the plug before cleaning
 If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for SKIL
power tools
- send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of
the tool are listed on www.skil.com)
ENVIRONMENT
 Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
- in observance of European Directive 2012/19/EC
on waste of electric and electronic equipment and
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol
q
will remind you of this when the need for
disposing occurs
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 7455 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 7455 in the language / languages: All languages as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info