Manual Skil 7370 (page 9 of 100) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

79048

Zoom out

Zoom in

1/100

- mount corresponding VELCRO sanding sheet to

sanding attachment

- 3 sanding positions

• Mounting “Louvre” attachment 9 (7375)

- remove VELCRO sanding sheet

- remove delta tip A while pushing button B

- mount “Louvre” attachment as illustrated

• Dust suction 0

- empty dustbox F regularly for optimal dust pick-up

performance

! do not use dustbox when sanding metal

• Pressure control ! (7375)

Warns the user when applying too much pressure on

the tool while working (too much pressure reduces the

sanding performance)

- green light 1 turns on when running tool is placed on

workpiece

- green light 2 turns on in case of pressure

- green light 3 turns on in case of increased pressure

- red light 4 turns on when pressure is too high

• On/off switch

- switch on/off the tool by pushing switch G 2

forward/backwards

! before the sanding surface reaches the

workpiece, you should switch on the tool

! before switching off the tool, you should lift it

from the workpiece

• Holding and guiding the tool @

- guide the tool parallel to the working surface

! do not apply too much pressure on the tool; let

the sanding surface do the work for you

- do not tilt the tool in order to avoid unwanted

sanding marks

! while working, always hold the tool at the grey-

coloured grip area(s)

- keep ventilation slots J 2 uncovered

APPLICATION ADVICE

• Use the tool as an orbital sander for large working

surfaces #

• Use the tool as a delta-sander for corners and edges $

• Use the tool with the special sanding attachments for

hard-to-reach places %

• When the foampad of the delta-tip is worn or damaged

at the top, you may extend its service life twice by

tearing it off, turning it 120° and putting it back (also

applicable to delta sanding sheet) ^

• When cord needs to be replaced, ﬁ rst remove foot-plate

as illustrated &

• Never use the same sanding sheet for wood and metal

• Recommended sanding sheet grits:

coarse - for removing paint;

for sanding of extremely rough wood

medium - for sanding of rough or plain wood

ﬁ ne - for smoothing of wood;

for ﬁ nishing of bare wood;

for smoothing surfaces with old paint

• Use different grit sizes when the working surface is

rough:

- start sanding with coarse or medium grit

- ﬁ nish with ﬁ ne grit

• For more tips see www.skileurope.com

• Vibration level

The vibration emission level stated at the back of this

instruction manual has been measured in accordance

with a standardised test given in EN 60745; it may be

used to compare one tool with another and as a

preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for different applications, or with

different or poorly maintainted accessories, may

signiﬁ cantly increase the exposure level

- the times when the tool is switched off or when it is

running but not actually doing the job, may

signiﬁ cantly reduce the exposure level

! protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

MAINTENANCE / SERVICE

• Always keep tool and cord clean (especially the

ventilation slots J 2)

- remove adhering sanding dust with a brush

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should be

carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skileurope.com)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2002/96/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol * will remind you of this when the need for

disposing occurs

Ponceuse polyvalente 7370/7375

INTRODUCTION

• Cet outil sert au ponçage et au polissage à sec du bois,

des surfaces peintes, du plastique et du mastic

• Lisez et conservez ce manuel d’instructions 3

SPECIFICATIONS TECHNIQUES 1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Skil 7370 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Skil 7370 Manual

Product: