Manual Skil 7365 (page 6 of 80) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78507

Zoom out

Zoom in

1/80

SAFETY INSTRUCTIONS FOR SANDERS

● Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start working

● Always keep the cord away from moving parts of the

tool; direct the cord to the rear away from the tool

● When you put away the tool, switch off the motor and

ensure that all moving parts have come to a complete

standstill

● Use completely unrolled and safe extension cords with a

capacity of 16 Amps (U.K. 13 Amps)

● In case of electrical or mechanical malfunction,

immediately switch off the tool and disconnect the plug

● SKIL can assure flawless functioning of the tool only

when original accessories are used

● This tool should not be used by people under the age of

16 years

● The noise level when working can exceed 85 dB(A);

wear ear protection

● If the cord is damaged or cut through while working, do

not touch the cord, but immediately disconnect the plug

● Never use tool when cord is damaged; have it replaced

by a qualified person

● Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool (tools with

a rating of 230V or 240V can also be connected to a

220V supply)

● This tool is not suitable for wet sanding

● Do not work materials containing asbestos (asbestos

is considered carcinogenic)

● When sanding metal, sparks are generated; do not use

dustbox and keep other persons and combustible

material from work area

● Do not touch the moving sanding sheet

● Do not continue to use worn, torn or heavily clogged

sanding sheets

● Wear protective gloves, safety glasses, close-fitting

clothes and hair protection (for long hair)

● Take protective measures when during work dust

can develop that is harmful to one's health,

combustible or explosive (some dusts are considered

carcinogenic); wear a dust mask and work with dust/chip

extraction when connectable

● Always disconnect plug from power source before

making any adjustment or changing any accessory

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

● Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

● If for any reason the old plug is cut off the cord of this

tool, it must be disposed of safely and not left

unattended

TOOL ELEMENTS 2

A Dust box

B Pressure control (7365)

C On/off switch

D Sanding speed selection wheel (7360)

USE

● Mounting of sanding sheet

7350/7360/7365 3

7360/7365 4

! disconnect the plug

! the dust suction requires the use of perforated

sanding sheets

! perforation in sanding sheet should correspond

with perforation in sanding foot 3

! replace worn sanding sheets in time

! always use the tool with the total sanding surface

covered with sanding paper

● Dust suction 5

- empty dustbox A regularly for optimal dust pick-up

performance

! do not use dustbox when sanding metal

● Pressure control (7365) 6

Warns the user when applying too much pressure on the

tool while working (too much pressure reduces the

sanding performance)

- green light 1 turns on when running tool is placed on

workpiece

- green light 2 turns on in case of pressure

- green light 3 turns on in case of increased pressure

- red light 4 turns on when pressure is too high

● On/off switch

- switch on/off the tool by pushing switch C 2

forward/backwards

! before the sanding surface reaches the

workpiece, you should switch on the tool

! before switching off the tool, you should lift it

from the workpiece

● VariTronic speed control (7360)

For optimal sanding results on different materials

- with wheel D 2 you can set the desired sanding

speed

- adjust speed to grit size used

- before starting a job, find the optimal speed and grit

by testing out on spare material

● Holding and guiding the tool 7

- guide the tool parallel to the working surface

! do not apply too much pressure on the tool; let

the sanding surface do the work for you

- do not tilt the tool in order to avoid unwanted sanding

marks

- keep the ventilation slots uncovered

APPLICATION ADVICE

● Move the tool in straight movements in line with the

grain

- for sanding bare wood surfaces

- for extra fine finishing

● Never use the same sanding sheet for wood and metal

● When cord needs to be replaced, first remove foot-plate

as illustrated 8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Skil 7365 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Skil 7365 Manual

Product: