644739
6
Zoom out
Zoom in
Previous page
1/92
Next page
6
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Powertoolsaredangerousinthehandsofuntrained
users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.,
in accordance with these instructions, taking into
account the working conditions and the work to be
performed.Useofthepowertoolforoperations
differentfromthoseintendedcouldresultina
hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
Thiswillensurethatthesafetyofthepowertoolis
maintained.
SAFETY INSTRUCTIONS FOR DRILLS
• Avoiddamagethatcanbecausedbyscrews,nailsand
otherelementsinyourworkpiece;removethembefore
you start working
• Alwayskeepthecordawayfrommovingpartsofthe
tool
• Secure the workpiece (a workpiece clamped with
clampingdevicesorinaviceisheldmoresecurelythan
by hand)
• Whenyouputawaythetool,switchoffthemotorand
ensurethatallmovingpartshavecometoacomplete
standstill
• Usecompletelyunrolledandsafeextensioncordswith
acapacityof16Amps(U.K.13Amps)
• Incaseofelectricalormechanicalmalfunction,
immediatelyswitchoffthetoolanddisconnecttheplug
• SKILcanassureawlessfunctioningofthetoolonly
when the correct accessories are used which can be
obtainedfromyourSKILdealer
• Useonlyaccessorieswithanallowablespeedmatching
atleastthehighestno-loadspeedofthetool
• Thistoolshouldnotbeusedbypeopleundertheageof
16 years
• Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory or fastener may contact hidden wiring or
its own cord(cuttingaccessoryandfasteners
contactinga“live”wiremaymakeexposedmetalparts
ofthepowertool“live”andcouldgivetheoperatoran
electric shock)
• Use suitable detectors to find hidden utility lines or
call the local utility company for assistance (contact
with electric lines can lead to fire or electrical shock;
damaging a gas line can result in an explosion;
penetrating a water pipe will cause property damage or
an electrical shock)
• Do not work materials containing asbestos (asbestos
is considered carcinogenic)
• Dustfrommaterialsuchaspaintcontaininglead,some
woodspecies,mineralsandmetalmaybeharmful
(contactwithorinhalationofthedustmaycause
allergic reactions and/or respiratory diseases to the
operator or bystanders); wear a dust mask and work
with a dust extraction device when connectable
• Certainkindsofdustareclassiedascarcinogenic
(such as oak and beech dust) especially in conjunction
withadditivesforwoodconditioning;wear a dust
mask and work with a dust extraction device when
connectable
• Followthedust-relatednationalrequirementsforthe
materials you want to work with
• Ifthecordisdamagedorcutthroughwhileworking,do
nottouchthecord,butimmediatelydisconnecttheplug
• Neverusethetoolwhencordisdamaged;haveit
replacedbyaqualiedperson
• Alwayscheckthatthesupplyvoltageisthesameasthe
voltageindicatedonthenameplateofthetool(tools
witharatingof230Vor240Vcanalsobeconnectedto
a 220V supply)
• Ifthedrillbitbecomesunexpectedlyjammed(causinga
sudden,dangerousreaction),immediatelyswitchoffthe
tool
• Alwaysdisconnectplugfrompowersourcebefore
making any adjustment or changing any accessory
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
• Donotconnecttheblue(=neutral)orbrown(=live)wire
inthecordofthistooltotheearthterminaloftheplug
• Ifforanyreasontheoldplugiscutoffthecordofthis
tool,itmustbedisposedofsafelyandnotleft
unattended
USE
• On/off4
• Switchlockingforcontinuoususe5
• Speedcontrolforsmoothstarting6
• Changingdirectionofrotation7
- whennotproperlysetinleft/rightposition,switchA
cannotbeactivated
! change direction of rotation only when tool is at a
complete standstill
• Changingbits8
- insert the bit as deep as possible in the chuck
! do not use bits with a damaged shank
• Holdingandguidingthetool
! while working, always hold the tool at the grey-
coloured grip area(s) 9
- keepventilationslotsE2uncovered
- do not apply too much pressure on the tool; let the
tooldotheworkforyou
• Beltclip0
APPLICATION ADVICE
• Whendrillingferrousmetals
- pre-drillasmallerhole,whenalargeholeisrequired
- lubricate drill bit occasionally with oil
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 6502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 6502 in the language / languages: All languages as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info