644678
7
Zoom out
Zoom in
Previous page
1/100
Next page
7
 Never use the tool when cord is damaged; have it
replaced by a qualied person
ACCESSORIES
 SKIL can assure awless functioning of the tool only
when original accessories are used
 Use only accessories with an allowable speed matching
at least the highest no-load speed of the tool
DURING USE
 Always keep the cord away from moving parts of the tool
 If the drill bit becomes unexpectedly jammed (causing
a sudden, dangerous reaction), immediately switch o
the tool
 Hold the power tool only by the insulated gripping
surfaces when performing an operation where the
accessory may contact hidden wiring or its own
power cord (contact with a “live” wire will also make
exposed metal parts of the power tool “live” and shock
the operator)
 In case of electrical or mechanical malfunction,
immediately switch o the tool and disconnect the plug
 If the cord is damaged or cut through while working, do
not touch the cord, but immediately disconnect the plug
AFTER USE
 When you put away the tool, switch o the motor and
ensure that all moving parts have come to a complete
standstill
EXPLANATION OF SYMBOLS ON TOOL
3
Read the instruction manual before use
4
Double insulation (no earth wire required)
5
Do not dispose of the tool together with household
waste material
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
 Do not connect the blue (= neutral) or brown (= live) wire
in the cord of this tool to the earth terminal of the plug
 If for any reason the old plug is cut o the cord of
this tool, it must be disposed of safely and not left
unattended
USE
 On/o
6
 Switch locking for continuous use
7
 Speed control for smooth starting
8
 Maximum speed control
9
With wheel C the maximum speed can be adjusted from
low to high
- switch on the tool
- lock the switch
- turn wheel C to select maximum speed
 Changing direction of rotation
q
- when not properly set in left/right position, switch A
2
cannot be activated
! change direction of rotation only when tool is at a
complete standstill
 Normal drilling versus impact drilling
w
- indicator F shows the selected drilling function
! select drilling function only when tool is switched

 Changing bits
e
! 
standstill
- insert the bit as deep as possible in the chuck
! do not use bits with a damaged shank
 Adjusting drilling depth
r
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any

operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.,
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
dierent from those intended could result in a hazardous
situation.
5) SERVICE
a) 
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
SAFETY INSTRUCTIONS FOR IMPACT DRILLS
GENERAL
 This tool should not be used by people under the age
of 16 years
 Always disconnect plug from power source before
making any adjustment or changing any accessory
 Wear ear protectors (exposure to noise can cause
hearing loss)
 Use auxiliary handle(s), if supplied with the tool
(loss of control can cause personal injury)
 Use completely unrolled and safe extension cords with a
capacity of 16 Amps (U.K. 13 Amps)
 Do not work materials containing asbestos
(asbestos is considered carcinogenic)
 Dust from material such as paint containing lead, some
wood species, minerals and metal may be harmful
(contact with or inhalation of the dust may cause allergic
reactions and/or respiratory diseases to the operator or
bystanders); wear a dust mask and work with a dust
extraction device when connectable
 Certain kinds of dust are classied as carcinogenic
(such as oak and beech dust) especially in conjunction
with additives for wood conditioning; wear a dust
mask and work with a dust extraction device when
connectable
 Follow the dust-related national requirements for the
materials you want to work with
BEFORE USE
 Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the tool
 Avoid damage that can be caused by screws, nails and
other elements in your workpiece; remove them before
you start working
 
or call the local utility company for assistance
(contact with electric lines can lead to re or electrical
shock; damaging a gas line can result in an explosion;
penetrating a water pipe will cause property damage or
an electrical shock)
 Secure the workpiece (a workpiece clamped with
clamping devices or in a vice is held more securely than
by hand)
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 6420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 6420 in the language / languages: All languages as an attachment in your email.

The manual is 4,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info