758588
9
Zoom out
Zoom in
Previous page
1/112
Next page
9
ENVIRONMENT
Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
-in observance of European Directive 2012/19/EC
on waste of electric and electronic equipment and
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
-symbol 5 will remind you of this when the need for
disposing occurs
NOISE / VIBRATION
4951
Measured in accordance with EN 62841 the sound
pressure level of this tool is 85.0 dB(A) and the sound
power level 96.0 dB(A) (uncertainty K = 5 dB), and the
vibration (triax vector sum; uncertainty K = 1.5 m/s²)
cutting board 22.7 m/s²
cutting wooden beams 17.6 m/s²
4961
Measured in accordance with EN 62841 the sound
pressure level of this tool is 88.0 dB(A) and the sound
power level 99.0 dB(A) (uncertainty K = 5 dB), and the
vibration (triax vector sum; uncertainty K = 1.5 m/s²)
cutting board 19.0 m/s²
cutting wooden beams 19.1 m/s²
The vibration emission level has been measured in
accordance with a standardised test given in EN 62841;
it may be used to compare one tool with another and as
a preliminary assessment of exposure to vibration when
using the tool for the applications mentioned
-using the tool for dierent applications, or with dierent
or poorly maintained accessories, may signicantly
increase the exposure level
-the times when the tool is switched o or when it is
running but not actually doing the job, may signicantly
reduce the exposure level
! 
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
b
Scie sabre 4951/4961
INTRODUCTION
Cet outil est conçu pour la découpe du bois, du plastique,
du métal et des matériaux de construction, ainsi que pour
l’élagage et l’ébranchage ; il convient pour les coupes
droites et curvilignes
Cet outil n’est pas conçu pour un usage professionnel
Lisez et conservez ce manuel d’instruction 3
CARACTERISTIQUES TECHNIQUES 1
ELEMENTS DE L’OUTIL 2
A Interrupteur de marche/arrêt et réglage de vitesse
B Serrage de lame
Operating the tool
! securely clamp the workpiece
-mark the cutting line on the workpiece
-connect plug to power source
-hold the tool with one hand on handle D 2 and the
other on the insulated barrel grip E 2
-switch on the tool
-guide the tool along the marked cutting line
-keep footplate F 2 rmly against the workpiece to
minimize counter-force and vibration
Holding and guiding the tool
! while working, always hold the tool at the grey-
coloured grip area(s) 9
-keep ventilation slots J 2 uncovered
-do not apply too much pressure on the tool; let the tool
do the work for you
! ensure that the saw blade extends beyond the
work throughout the stroke q
Adjusting eective sawing depth w
-use both fastening bolts G for sliding footplate F
forward/backwards in order to enlarge/reduce the
eective sawing depth
APPLICATION ADVICE
Plunge cutting e
Plunge cuts can be made in wood and other soft
materials without pre-drilling a hole
-use a thick saw blade
-mount the blade with the teeth facing upward
-mark desired cutting line on the workpiece
-tilt the tool so that the blade does not touch the
workpiece
-switch on the tool and carefully engage the moving saw
blade into the workpiece
-after the blade has penetrated through the workpiece
continue sawing along the marked cutting line
! do not make plunge cuts in metal materials
Use the appropriate saw blades r
When cutting metals, lubricate saw blade regularly with
oil
Splinter-free cutting
-cover cutting-line with several layers of wide tape
before cutting
-always face the good side of the workpiece down
For more information see www.skil.com
MAINTENANCE / SERVICE
This tool is not intended for professional use
Always keep tool and cord clean (especially ventilation
slots J 2)
! disconnect the plug before cleaning
If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for SKIL
power tools
-send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of the
tool are listed on www.skil.com)
Be aware that damage due to overload or improper
handling of the tool will be excluded from the warranty
(for the SKIL warranty conditions see www.skil.com or
ask your dealer)
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 4961 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 4961 in the language / languages: All languages as an attachment in your email.

The manual is 5,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info