110184
11
Zoom out
Zoom in
Previous page
1/88
Next page
11
• Dust suction @a
! do not use vacuum cleaner when cutting metal
• Dust blowing @b
• Saw blade storage #
! for T-shank blades only
• Spot light $
• Operating the tool
- before switching on the tool, ensure that front end of
footplate rests fl at on the workpiece
- hold tool rmly with both hands, so you will have full
control of the tool at all times
- ensure that complete surface of footplate rests fi rmly
on the workpiece
- ensure that the blade has come to a complete
standstill, before you lift the tool from the workpiece
- keep ventilation slots J 2 uncovered
APPLICATION ADVICE
Use the appropriate saw blades %
! tool accepts most commonly available T-shank
and U-shank blades ^
When cutting metals, lubricate saw blade regularly with
oil
Pre-drill a hole before making cut-outs &
Use rip fence K for making parallel cuts * (4585)
• Splinter-free cutting
- cover cutting-line with several layers of wide tape
before cutting
- always face the good side of the workpiece down
For more tips see www.skileurope.com
GUARANTEE / ENVIRONMENT
Always keep tool and cord clean (especially the
ventilation slots)
! disconnect the plug before cleaning
This SKIL product is guaranteed in accordance with
statutory/country-specifi c regulations; damage due to
normal wear and tear, overload or improper handling will
be excluded from the guarantee
In case of a complaint, send the tool undismantled
together with proof of purchase to your dealer or the
nearest SKIL service station (addresses as well as the
service diagram of the tool are listed on www.
skileurope.com)
Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
- in observance of European Directive 2002/96/EC on
waste of electric and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol ( will remind you of this when the need for
disposing occurs
F
Scie sauteuse 4580/4581/4585
INTRODUCTION
Cet outil est conçu pour effectuer des découpes et
coupes dans le bois, les matières plastiques, le métal,
les plaques en céramique et le caoutchouc, et est
approprié pour des coupes droites et curvilignes avec
des angles d’onglet jusqu’à 45°
Lisez et conservez ce manuel d’instructions 3
SPECIFICATIONS TECHNIQUES 1
ELEMENTS DE L’OUTIL 2
A Interrupteur pour mise en marche/arrêt (4580/4581)
A Interrupteur de marche/arrêt et réglage de
vitesse (4585)
B Bouton de blocage de l’interrupteur
C Interrupteur de souffl erie de poussières
D Levier pour bloquer/relâcher la semelle
E Molette de réglage de la vitesse de sciage
F Levier de sélection de mode de coupe
G Rangement de lame de scie
H Eclairage
J Fentes de ventilation
SECURITE
INSTRUCTIONS GENERALES DE SECURITE
ATTENTION! Lisez tous les avertissements de
sécurité et toutes les instructions. Ne pas suivre les
avertissements et instructions peut entraîner un choc
électrique, un incendie et/ou de graves blessures sur les
personnes. Conservez tous les avertissements et
toutes les instructions pour pouvoir s’y reporter
ultérieurement. La notion d’”outil électroportatif” dans les
avertissements se rapporte à des outils électriques
raccordés au secteur (avec câble de raccordement).
1) SECURITE DE LA ZONE DE TRAVAIL
a) Maintenez l’endroit de travail propre et bien éclairé.
Un lieu de travail en désordre ou mal éclairé augmente
le risque d’accidents.
b) N’utilisez pas l’outil dans un environnement
présentant des risques d’explosion et où se trouvent
des liquides, des gaz ou poussières inflammables.
Les outils électroportatifs génèrent des étincelles
risquant d’enfl ammer les poussières ou les vapeurs.
c) Tenez les enfants et autres personnes éloignés
durant l’utilisation de l’outil électroportatif. En cas
d’inattention vous risquez de perdre le contrôle sur
l’outil.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 4581 AA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 4581 AA in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info