758353
8
Zoom out
Zoom in
Previous page
1/40
Next page
BLADE STORAGE COMPARTMENT
Your tool is equipped with a blade storage
compartment on the backside of your saw
(Fig. 5). To open, pull compartment in direction
of arrow. To close, push compartment toward
the tool until it snaps into place.
Be sure compartment is closed to prevent
blades from falling out.
FIG. 5
BLADE
STORAGE
COMPARTMENT
-8-
LASER LIGHT ON/OFF BUTTON
(Model 4495 only)
The laser “ON/OFF” button allows you to turn
the laser feature on or off.
To turn laser ON, depress the button.
To turn laser OFF, depress the button again.
TO ADJUST THE LASER LINE GUIDE
Your laser line guide is pre-set at the factory
and should not need adjustment. If adjustment
is required, use a flat head screwdriver to turn
the adjustment screw located on the side of
the laser module (Fig. 4). Turn on the laser
light ON. Rotate the adjustment screw until the
laser line is in the center of the blade. There is
no need to turn the tool “ON” while adjusting
the light beam.
The Laser line guide has a limited amount of
travel. Do not continue to turn the adjustment
screw after the line stops moving or if it
becomes significantly harder to turn the screw.
Overturning the adjustment screw may cause
the adjustment system to break or cause the
adjustment screw to fall out of the tool.
USING THE LASER LINE GUIDE
Only turn on the laser light on when the tool is
on the workpiece.
1. First mark the line of cut on your workpiece
(good side down.)
2. Insert plug into the power source.
3. Place the front edge of the saw foot on the
workpiece, turn laser light ON and align beam
with the line of cut .
4. Hold the tool firmly, squeeze the trigger and
allow the tool to reach desired speed.
5. Press down (to keep the saw foot flat
against the work surface) as you slowly push
the saw forward, keeping the beam in line with
the line of cut .
6. After completion of the cut, turn the laser
light OFF.
LASER LIGHT
ADJUSTMENT
SCREW
FIG. 4
WAVELENGTH: 650 nm
Max. Output: < 5 mW
LASER RADIATION - AVOID
DIRECT EYE EXPOSURE
CLASS IIIa LASER PRODUCT
RADIACIÓN LÁSER: EVITE LA
EXPOSICIÓN DIRECTA DE LOS OJOS
RAYONNEMENT LASER - ÉVITER
D’Y EXPOSER DIRECTEMENT LES YEUX
COMPLIES WITH FDA
21CFR1040.10 AND 1040.11
AVOID EXPOSURE -
LASER RADIATION
IS EMITTED FROM
THIS APERTURE.
EVITE LA EXPOSICIÓN.
DESDE ESTA ABERTURA SE
EMITE RADIACIÓN LÁSER.
ÉVITER L'EXPOSITION -
RAYONNEMENT LASER
ÉMISPAR CETTE
OUVERTURE.
SM 1619X03034 07-08 7/2/08 1:38 PM Page 8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 4495 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 4495 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info