758590
11
Zoom out
Zoom in
Previous page
1/140
Next page
11
-switch on the tool by pulling trigger B
-control the speed steplessly from zero to maximum by
putting less or more pressure on the trigger
-switch o by releasing trigger B
Locking knob A can be activated 9
-if activated, the on/o switch is blocked and the
machine is secured against being switched on
unintentionally
Mounting saw blade w
! remove battery from tool before making any
adjustments or changing accessories
-turn blade clamp C in same direction as arrow D on tool
and hold it in that position
-insert blade (with teeth facing down or up) to full depth
-release blade clamp C
-push in and pull out blade to check whether it is locked
correctly
Removing saw blade w
! remove battery from tool before making any
adjustments or changing accessories
-turn blade clamp C in same direction as arrow D on tool
and hold it in that position
-pull out blade
-release blade clamp C
Orbital action for fast cutting e
-for activating the orbital action of the saw blade use
switch N as illustrated
! do not activate the orbital action when cutting
metal
Operating the tool
! securely clamp the workpiece
-mark the cutting line on the workpiece
-mount battery on tool
-hold the tool with one hand on handle E and the other
on the insulated barrel grip F
-switch on the tool
-guide the tool along the marked cutting line
-keep footplate G rmly against the workpiece to
minimize counter-force and vibration
Holding and guiding the tool
! while working, always hold the tool at the grey-
coloured grip area(s) r
-keep ventilation slots H uncovered
-do not apply too much pressure on the tool; let the tool
do the work for you
! ensure that the saw blade extends beyond the
work throughout the stroke t
Adjusting eective sawing depth y
! remove battery from tool before making any
adjustments or changing accessories
-use hex key K for loosening and fastening both
fastening bolts J
-slide footplate G forward/backwards in order to enlarge/
reduce the eective sawing depth
APPLICATION ADVICE
Plunge cutting u
Plunge cuts can be made in wood and other soft
materials without pre-drilling a hole
-use a thick saw blade
! remove battery from tool before making any
adjustments or changing accessories
-mount the blade with the teeth facing upward
-mark desired cutting line on the workpiece
BATTERIES
The battery supplied is partially charged (to ensure
full capacity of the battery, completely charge the battery
in the battery charger before using your power tool for the
rst time)
Only use the following batteries and chargers with
this tool
-SKIL battery: BR1*31****
-SKIL charger: CR1*31****
Do not use the battery when damaged; it should be
replaced
Do not disassemble the battery
Do not expose tool/battery to rain
Permitted ambient temperature (tool/charger/battery):
-when charging 4...40°C
-during operation –20...+50°C
-during storage –20...+50°C
EXPLANATION OF SYMBOLS ON TOOL/BATTERY
3 Read the instruction manual before use
4 Batteries may explode when disposed of in re, so do not
burn battery for any reason
5 Store tool/charger/battery in locations where temperature
will not exceed 50°C
6 Do not dispose of electric tools and batteries together
with household waste material
USE
Charging battery
! read the safety warnings and instructions
provided with the charger
Removing/installing the battery 2
Battery level indicator 7
-press the battery level indicator button L to show the
current battery level 7a
! when the lowest level of the battery indicator
7b, the
battery is empty
! 
after pressing button L 7c, the battery is not
within the allowable operating temperature range
LED light 8
LED-light automatically lights on when activating the on/
o switch
! 
protection is activated (see below)
Battery protection
The tool is suddenly being switched o or prevented from
being switched on, when
-the load is too high --> remove load and restart
-the battery temperature is not within the allowable
operating temperature range of -20 to +50°C --> 2
levels of the battery level indicator start ashing when
pressing button L 7c; wait until battery has returned
within the allowable operating temperature range
-the battery is nearly empty (to protect against
deep discharge) --> a low battery level or ashing low
battery level 7b is shown by the battery level indicator
when pressing button L; charge battery
! 

damaged
Combined switch for on/o and speed control with
locking knob 9 q
-rst unlock by pressing knob A
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 3480 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 3480 in the language / languages: All languages as an attachment in your email.

The manual is 5,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info