797778
11
Zoom out
Zoom in
Previous page
1/140
Next page
11
USE
Combined switch for on/o and speed control A 2
Control the speed steplessly from zero to maximum by
putting less or more pressure on the trigger
Charging battery 9
!remove battery from tool
-connect charger to power source as illustrated 9a
-green light B will turn on indicating that the charger is
ready for operation 9a
-insert battery into charger as illustrated 9b
-red light C will turn on indicating that the battery is
being charged 9c
-after approximately 3 hours (2610Z08495) / 5 hours
(2610Z08496) the battery is fully charged and green
light B turns on 9d
!remove battery from charger after charging period
has ended thereby lengthening the service life of
the battery
IMPORTANT:
-if red light C does not turn on after inserting a battery,
this may mean that the battery is too cold or too hot
(charger only charges batteries when its temperature is
between 0°C and 45°C)
-the lithium-ion battery can be charged at any time
(interrupting the charging procedure does not damage
the battery)
-the lithium-ion battery does not have to be empty
before charging (no "memory-eect" as with nickel-
cadmium batteries)
-while charging, the charger and the battery may
become warm to touch; this is normal and does not
indicate a problem
-ensure that the outside surface of the battery is clean
and dry before inserting into charger
-do not remove battery from tool while it is running
-if you anticipate long periods of non-use for the tool, it
is best to unplug the charger from its power source
-when the lithium-ion battery is empty, the tool is
switched o automatically
-a signicantly reduced working period after charging
indicates that the battery is worn out and should be
replaced
Changing direction of rotation q
-when not properly set in left/right position, switch A 2
cannot be activated
!change direction of rotation only when tool is at a
complete standstill
Changing bits w
!do not use bits with a damaged shank
Torque control (VariTorque) e
-output torque will increase as clutch ring D is rotated
from 1 to 19; position E will lock up the clutch to permit
drilling or driving heavy duty work
-when turning in a screw, rst try VariTorque position 1
and increase until the desired depth has been reached
Mechanical gear selection r (2832)
-set selector G to desired speed
!actuate the gear selector while tool is running
slowly
LOW
-low speed
-high torque
above and by persons who
have physical, sensory or
mental limitations or a lack
of experience or knowledge
if a person responsible for
their safety supervises them
or has instructed them in the
safe operation of the charger
and they understand the
associated dangers (otherwise,
there is a danger of operating
errors and injuries)
Supervise children (this will
ensure that children do not play
with the charger)
Cleaning and user
maintenance of the battery
charger shall not be made by
children without supervision
Only use SKIL charger 2610Z08495 or 2610Z08496 and
SKIL battery pack 2610Z08494 with this tool
Charge battery only with the charger that is supplied with
the tool
Do not touch the contacts in the charger
Do not expose tool/charger/battery to rain
Do not charge battery in damp or wet environments
Do not use charger when damaged; take it to one of the
ocially registered SKIL Service Stations for a safety
check
Do not use charger when cord or plug is damaged; cord
or plug should be replaced immediately at one of the
ocially registered SKIL Service Stations
Do not use battery when damaged; it should be replaced
immediately
Do not disassemble charger or battery
Do not attempt to recharge non-rechargeable batteries
with the charger
Permitted ambient temperature (tool/charger/battery):
-when charging 0...+45°C
-during operation –20...+50°C
-during storage –20...+50°C
EXPLANATION OF SYMBOLS ON TOOL/CHARGER/
BATTERY
3 Read the instruction manual before use
4 Only use the charger indoors
5 Double insulation (no earth wire required)
6 Batteries may explode when disposed of in re, so do not
burn battery for any reason
7 Store tool/charger/battery in locations where temperature
will not exceed 50°C
8 Do not dispose of electric tools and batteries together
with household waste material
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 2830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 2830 in the language / languages: All languages as an attachment in your email.

The manual is 4.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info