Manual Skil 1565 (page 7 of 112) (All languages)

591210

Zoom out

Zoom in

1/112

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools. Check for misalignment or





operation. If damaged, have the power tool repaired

 Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g) 

in accordance with these instructions, taking into

account the working conditions and the work to

 Use of the power tool for operations

dierent from those intended could result in a hazardous

situation.

5) SERVICE

a) 

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

SAFETY INSTRUCTIONS FOR PLANERS

GENERAL

 This tool should not be used by people under the age

of 16 years

 The noise level when working can exceed 85 dB(A);

wear ear protection ④

 Dust from material such as paint containing lead, some

wood species, minerals and metal may be harmful

(contact with or inhalation of the dust may cause allergic

reactions and/or respiratory diseases to the operator or

bystanders); wear a dust mask and work with a dust



 Certain kinds of dust are classied as carcinogenic

(such as oak and beech dust) especially in conjunction

with additives for wood conditioning; wear a dust

mask and work with a dust extraction device when



 Follow the dust-related national requirements for the

materials you want to work with

 SKIL can assure awless functioning of the tool only

when original accessories are used

 Never use the tool when cord is damaged; have it

replaced by a qualied person

 

making any adjustment or changing any accessory

BEFORE USE

 Always check that the supply voltage is the same as

the voltage indicated on the nameplate of the tool (tools

with a rating of 230V or 240V can also be connected to

a 220V supply)

 Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start working

 Before using the tool check that the knives do not brush

anywhere

 Use completely unrolled and safe extension cords with a

capacity of 16 Amps (U.K. 13 Amps)

 Use clamps or another practical way to secure and

 (holding

the work by your hand or against the body leaves it

unstable and may lead to loss of control)

DURING USE

 



(cutting a "live" wire may make exposed metal parts of

the power tool "live"and shock the operator)

 Always keep the cord away from moving parts of the

tool; direct the cord to the rear, away from the tool

 Keep your ngers away from the rotating knives

 In case of electrical or mechanical malfunction,

immediately switch o the tool and disconnect the plug

 If the cord is damaged or cut through while working, do

not touch the cord, but immediately disconnect the plug

 If any chip should get jammed in the chip outlet, you

should switch o the motor, ensure that all moving parts

have come to a complete standstill, disconnect the plug,

and remove the jammed chip

AFTER USE

 

tool down (an exposed knife may engage the surface

leading to possible loss of control and serious injury)

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

 Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

 If for any reason the old plug is cut o the cord of

this tool, it must be disposed of safely and not left

unattended

USE

 Changing/reversing knives ⑥

This planer is equipped with non-grindable knives with

cutting edges on both sides; so if one side has become

blunt, the other side can be used

! 

- remove guiding devices, if mounted

- take wrench from storage A

- turn tool upside down

- loosen 3 bolts B with wrench (do not remove bolts)

- push knife out of cutter block with piece of wood

- put knife back in cutter block in reversed position, or

use new knife

! groove in knife should match ledge in cutter



! 

- rmly tighten 3 bolts B with wrench

! change/reverse knives in time; only use sharp

knives

! 

time

! do not attempt to adjust the knives with



manufacturing

 Adjusting planing depth ⑦

- turn knob D in "+"/"-" direction for increasing/

decreasing planing depth

- use indicator E as reference

- always select a shallow planing depth and repeat the

planing and adjusting process until the required depth

is reached

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Skil 1565 in the language / languages: All languages as an attachment in your email.

The manual is 3,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Skil 1565 Manual

Product: