591142
7
Zoom out
Zoom in
Previous page
1/120
Next page
7
 Always ensure that the ventilation openings are kept
clear of debris
 In case of electrical or mechanical malfunction,
immediately switch o the tool and disconnect the plug
AFTER USE
 Before you put down the tool, switch o the motor and
ensure that all moving parts have come to a complete
standstill
 Always disconnect plug from power source
-whenever leaving the tool unattended
-before clearing jammed material
-before checking, cleaning or working on the tool
-after striking a foreign object
-whenever the tool starts vibrating abnormally
 Store the tool indoors in a dry and locked-up place, out
of reach of children
EXPLANATION OF SYMBOLS ON TOOL
Read the instruction manual before use
Do not expose tool to rain
Double insulation (no earth wire required)
Do not dispose of the tool together with household
waste material
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
 Do not connect the blue (= neutral) or brown (= live) wire
in the cord of this tool to the earth terminal of the plug
 If for any reason the old plug is cut o the cord of
this tool, it must be disposed of safely and not left
unattended
USE
 Mounting saw blade
!disconnect the plug
-press blade clamp A in same direction as arrow C on
tool and hold it in that position
-insert blade (with teeth facing down) to full depth
-release blade clamp A
-push in and pull out blade to check whether it is locked
correctly
 Removing saw blade
-press blade clamp A in same direction as arrow C on
tool and hold it in that position
-pull out blade
-release blade clamp A
 Cord restraint
-hook the loop in the extension cord over restraint D as
illustrated
-pull tight to secure the extension cord
 On/o
-switch on tool by rst pressing safety switch E and
then pulling trigger switch F
-switch o tool by releasing trigger switch F
 Operating the tool
-connect plug to power source
-ensure power cord is located to the rear, away from
the saw blade and so positioned that it will not be
caught on branches or the like during cutting
-switch on the tool
!the tool should run at full speed before the blade
enters the workpiece
-always engage the moving saw blade into the
workpiece in a downward direction
-keep footplate G rmly against the workpiece to
minimize counter-force and vibration
!
coloured grip area(s)
-do not apply too much pressure on the tool; let the tool
do the work for you
-keep ventilation slots H uncovered
!ensure that the saw blade extends beyond the
work throughout the stroke
-support workpiece/logs so that the face sides at the
cut do not close in against each other, which would
result in the blade being jammed or pinched
-position and set short logs safely prior to sawing
!there is a risk of accidents when sawing wood or
branches under tension; be careful
APPLICATION ADVICE
 Use the appropriate saw blades
 For more tips see www.skil.com
MAINTENANCE / SERVICE
 This tool is not intended for professional use
 Always keep tool and cord clean (especially ventilation
slots H )
!disconnect the plug before cleaning
 Storage
-store the tool indoors in a dry and locked-up place,
out of reach of children
-securely mount storage rail on the wall with 4 screws
(not supplied) and horizontally leveled
 If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for SKIL
power tools
-send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of
the tool are listed on www.skil.com)
ENVIRONMENT
 Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
-in observance of European Directive 2002/96/EC
on waste of electric and electronic equipment and
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
-symbol will remind you of this when the need for
disposing occurs
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 0788 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 0788 in the language / languages: All languages as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info