Manual Skil 0710 (page 8 of 128) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

479938

Zoom out

Zoom in

1/128

the job better and safer at the rate for which it was

designed

b) Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired

c) Disconnect the plug from the power source and/or

the battery pack from the power tool before making

any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally

d) Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool or

these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control

g) Use the power tool, accessories and tool bits etc., in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations dierent

from those intended could result in a hazardous situation

5) SERVICE

a) Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained

SPECIFIC SAFETY INSTRUCTIONS FOR LAWN

MOWERS

EXPLANATION OF SYMBOLS ON TOOL

4 Read the instruction manual before use

5 Double insulation (no earth wire required)

6 Do not expose tool to rain

7 Pay attention to the risk of injury caused by flying

debris (keep bystanders a safe distance away from work

area)

8 Beware of sharp blades

9 Keep the (extension) cord away from the rotating cutting

blade

0 The cutting blade continues to rotate for a short time after

tool is switched o (do not touch rotating blade)

! Switch o and disconnect plug before cleaning/

maintenance or if (extension) cord is damaged or

entangled

@ Do not dispose of the tool together with household waste

material

GENERAL

• Avoid operating the mower on wet lawns

• The user is responsible for accidents or hazards

occurring to other people or their property

• Never operate the tool with a defective rear guard or

defective grass box

• When operating the tool without grass box, ensure that

the rear guard is in closed position (risk of injury

caused by rotating cutting blade)

• Always disconnect plug from power source

- whenever leaving the tool unattended

- before clearing jammed material

- before checking, cleaning or working on the tool

- after striking a foreign object

- whenever the tool starts vibrating abnormally

ELECTRICAL SAFETY

• Inspect the cord periodically and have it replaced by a

qualied person, if damaged

• When operating the tool use a residual current device

(RCD) with a triggering current of 30 mA maximum

• Use completely unrolled and safe extension cords with a

capacity of 16 Amps (U.K. 13 Amps)

• Only use an extension cord of types H05VV-F or

H05RN-F which is intended for outdoor use and

equipped with a watertight plug and coupling-socket

• Do not run over, crush or pull the (extension) cord

• Protect the (extension) cord from heat, oil and sharp

edges

• Inspect the extension cord periodically and replace it, if

damaged (inadequate extension cords can be

dangerous)

PERSONAL SAFETY

• Do not operate the tool when barefoot or wearing open

sandals; always wear sturdy shoes and long trousers

• Be familiar with the controls and the proper use of the tool

• Never mow in the direct vicinity of persons (especially

children) and animals

• Always keep hands and feet away from rotating

parts

• Keep away from the discharge opening at all times

• Switch on the motor according to instructions and with

feet well away from the cutting blade

• This tool is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given

supervision or instruction concerning use of the

tool by a person responsible for their safety (local

regulations can restrict the age of the operator)

• Ensure that children do not play with the tool

• Operate the mower at a walking pace only (do not run)

• Keep proper footing on slopes and do not mow extremely

steep slopes

• Be extremely careful when moving backwards or pulling

the mower towards you

BEFORE USE

• Check the functioning of the tool before each use and, in

case of a defect, have it repaired immediately by a

qualied person; never open the tool yourself

• Thoroughly inspect the area where the mower is to be

used and remove all hard objects which could be caught

up and thrown by the cutting mechanism

• Always ensure that the cutting mechanism is in good

working order (have worn or damaged parts replaced)

• Keep all nuts, bolts and screws tight to be sure that the

mower is in safe working condition

DURING USE

• Only mow with sucient daylight or with appropriate

articial lighting

• Do not tilt the tool when starting or switching on the motor,

except if the tool has to be tilted for starting in long grass

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Skil 0710 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Skil 0710 Manual

Product: