701729
10
Zoom out
Zoom in
Previous page
1/112
Next page
10
Lawn raker 0701
INTRODUCTION
This tool has been specically designed for removing
moss from lawn
This tool is not intended for professional use
Check whether the packaging contains all parts as
illustrated in drawing 2
When parts are missing or damaged, please contact your
dealer
Read this instruction manual carefully before use
and save it for future reference 3
Pay special attention to the safety instructions and
warnings; failure to follow these may result in
serious injury
TECHNICAL DATA 1
TOOL ELEMENTS 2
A Protective guard
B Protective guard screw
C Wheel
D Fastening screw
E Spindle-lock button
F Collet nut
G Wrench
H Raking unit
J Locking sleeve
K Handle
L Telescopic tube
M Cord restraint
N Safety switch
P Trigger switch
Q Ventilation slots
R Storage rail (screws not supplied)
SAFETY
SPECIFIC SAFETY INSTRUCTIONS FOR LAWN
RAKERS
GENERAL
Be familiar with the controls and the proper use of the tool
The user is responsible for accidents or hazards
occurring to other people or their property
Only use the tool when the ambient temperature is
between 0°C and 40°C
Do not use the tool for removing wet moss
PERSONAL SAFETY
This tool can be used by
children aged 8 and above and
by persons who have physical,
sensory or mental limitations
or a lack of experience or
knowledge if a person
responsible for their safety
supervises them or has
instructed them in the safe
operation of the tool and they
understand the associated
dangers (otherwise, there is a
danger of operating errors and
injuries)
Supervise children (this will
ensure that children do not play
with the tool)
Cleaning and user
maintenance of the tool shall
not be made by children
without supervision
Always wear eye protection, long trousers and sturdy
shoes when operating the tool
Never operate the tool with a damaged protective guard
or without the guard mounted
Never operate the tool in the direct vicinity of persons;
stop using the tool when persons (especially children) or
pets are nearby
Never operate the tool when you are tired, sick or under
the inuence of drugs, alcohol or medication
ELECTRICAL SAFETY
Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the tool (tools with
a rating of 230V or 240V can also be connected to a
220V supply)
Never use the tool when the cord is damaged; it must be
replaced by a specially prepared cord available through
an after-sales service centre for SKIL power tools and
carried out by a qualied person
Do not connect a damaged cord to the power source or
touch a damaged cord before it is disconnected from the
power source (damaged cords can lead to contact with
live parts)
Inspect the extension cord periodically and replace it, if
damaged (inadequate extension cords can be
dangerous)
Only use an extension cord which is intended for outdoor
use and equipped with a watertight plug and coupling-
socket
Use completely unrolled and safe extension cords with a
capacity of 16 Amps (U.K. 13 Amps)
Only use an extension cord of types H05VV-F or
H05RN-F which is intended for outdoor use and
equipped with a watertight plug and coupling-socket
Only use extension cords with a maximum length of 40
metres (1,0 mm²), 60 metres (1,5 mm²) or 100 metres
(2,5 mm²)
When operating the tool use a residual current device
(RCD) with a triggering current of 30 mA maximum
Do not run over, crush or pull the (extension) cord
Protect the (extension) cord from heat, oil and sharp
edges
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 0701 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 0701 in the language / languages: All languages as an attachment in your email.

The manual is 5,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info