591225
5
Zoom out
Zoom in
Previous page
1/40
Next page
5
GB
Digital angle finder 0580
INTRODUCTION
This measuring tool is intended for digitally measuring
and defi ning angles from 0° to 220° (horizontal and
vertical)
Read this instruction manual carefully before use and
save it for future reference 2
TECHNICAL SPECIFICATIONS
Material aluminium
Measuring range 0° - 220°
Measuring accuracy
- angle +/- 0.5°
- bubble level 1 mm/m
Lowest indication unit 0.1°
Power supply 1x 6LR61/9V battery
Estimated battery life 20 hours
Operating temperature -10°C to 50°C
Storage temperature -20ºC to 70°C
Automatic switch-off after approx. 5 min. of inactivity
Length 380 mm
Weight 0,18 kg
TOOL ELEMENTS 1
A On/off button
B “HOLD” button for retaining measured values
C LCD display
D Bubble level for horizontal planes
E Bubble level for vertical planes
F Base leg
G Fold-out leg with 32 cm ruler
H Battery compartment cover
J Low battery level indicator
K Retain mode (“HOLD”) indicator
USE
• Mounting of battery 3
- use exclusively alkaline-manganese or rechargeable
batteries
- remove cover H
- insert 9V battery (pay attention to correct
polarisation)
- mount cover H
- when battery level is low, symbol J 1 will appear in
display
- when symbol J 1 appears in the display for the fi rst
time, measuring is still possible but with reduced
accuracy; replace the battery
- always remove the battery from the tool, if the tool
will not be used for a long period
• On/off
- switch on/off the tool by pressing “On/Off” button A 1
- after approximately 5 minutes without button
actuation or angle change, the measuring tool
automatically switches off to preserve battery life
• Measuring angles 4
! protect the measuring tool against impact and
shock (dropping or banging the tool may lead to
faulty measurements)
! keep the contact edges of the measuring tool
clean (debris particles may lead to faulty
measurements)
- position base leg F 1 and fold-out leg G 1 against
the edges to be measured
- the reading in display C 1 corresponds with angle X
and remains unchanged until the legs are moved
! when directly projecting a measured angle onto a
workpiece, pay attention that base leg F and fold-
out leg G are not moved and that the retaining
(“HOLD”) mode is not switched on
• Retaining measured values
- the current reading can be retained in display C 1 by
pressing “HOLD” button B 1 (symbol K 1 will
appear in display)
- the reading remains unchanged (even when the legs
are moved) until “HOLD” button B is pressed again
! be aware that the retaining mode also
automatically switches off after 5 minutes of
inactivity
APPLICATION ADVICE
Use “HOLD” button B 1 for defi ning angles at hard-to-
reach and/or dark places where measuring and reading
cannot take place simultaneously
Use bubble level D 1 or E 1 for defi ning angles when
only one reference point is available 5
GUARANTEE / ENVIRONMENT
Always keep the measuring tool free of dust, moisture
and direct sunlight
Clean the tool with a dry, soft cloth (do not use cleaning
agents or solvents)
Always store the tool indoors in its protective carton/
case
Do not disassemble or modify the tool in any way
This SKIL product is guaranteed in accordance with
statutory/country-specifi c regulations; damage due to
normal wear and tear, overload or improper handling will
be excluded from the guarantee
In case of a complaint, send the tool undismantled
together with proof of purchase to your dealer or the
nearest SKIL service-station (addresses are listed on
www.skileurope.com)
SKIL_IB0580db.indd 5SKIL_IB0580db.indd 5 30-05-2007 13:07:3330-05-2007 13:07:33
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 0580 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 0580 in the language / languages: All languages as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info