758634
15
Zoom out
Zoom in
Previous page
1/236
Next page
15

same applies for persons who do not or do not
 The
operating instructions should always be ready to hand.
Persons unt or tired must not operate the chain saw.
It is recommended that the rst time user should have
practical instruction in the use of the chain saw and the
protective equipment from an experienced operator and
that the initial practice should be cutting logs on a saw
horse or cradle
Do not touch rotating chain
Always use approved personal protective equipment, this
reduces the danger of injury from thrown about cutting
material and accidental touching of the saw chain:
-Safety helmet, when there is a hazard of falling
branches or similar
-Hearing protection
-Protective glasses or a face mask
-Gloves with saw protection
-Trousers with saw protection
-Safety boots with saw protection, steel toes and non-
slip soles
Do not operate chain saw near other people,
children or animals
Do not operate chain saw after drinking alcohol

medication
Ensure that children do not play with the tool
AFTER USE
Always switch o the tool and remove the battery
-whenever leaving the tool unattended
-before clearing jammed material
-before checking, cleaning or working on the tool
-after striking a foreign object
-whenever the tool starts vibrating abnormally
Store the tool indoors in a dry and locked-up place, out
of reach of children
-store the battery pack separately from the tool
BATTERIES
(to ensure
full capacity of the battery, completely charge the battery
in the battery charger before using your power tool for the
rst time)

this tool
-SKIL battery: BR1*31****
-SKIL charger: CR1*31****
Do not use the battery when damaged; it should be
replaced
Do not disassemble the battery
Do not expose tool/battery to rain
Permitted ambient temperature (tool/charger/battery):
-when charging 4...40°C
-during operation –20...+50°C
-during storage –20...+50°C
EXPLANATION OF SYMBOLS ON TOOL/BATTERY
3 Read the instruction manual before use
4 Batteries may explode when disposed of in re, so do not
burn battery for any reason
5 Do not expose tool to rain
6 Wear protective glasses and hearing protection
7 Store tool/charger/battery in locations where temperature
will not exceed 50°C
8 Do not dispose of electric tools and batteries together
with household waste material
saw will reduce the likelihood of accidental contact with
the moving saw chain.
j) 
 Improperly tensioned
or lubricated chain may either break or increase the
chance for kickback.
k) 
not intended. For example: do not use chain saw

 Use of the chain saw for operations
dierent than intended could result in a hazardous
situation.
l) 
understanding of the risks and how to avoid them.
Serious injury could occur to the operator or bystanders
while felling a tree.
m) 
material, storing or servicing the chain saw. Make

removed. Unexpected actuation of the chain saw while
clearing jammed material or servicing may result in
serious personal injury.
CAUSES AND OPERATOR PREVENTION OF KICKBACK
Kickback may occur when the nose or tip of the guide bar
touches an object, or when the wood closes in and pinches
the saw chain in the cut.
Tip contact in some cases may cause a sudden reverse
reaction, kicking the guide bar up and back towards the
operator.
Pinching the saw chain along the top of the guide bar may
push the guide bar rapidly back towards the operator.
Either of these reactions may cause you to lose control of the
saw which could result in serious personal injury. Do not rely
exclusively upon the safety devices built into your saw. As a
chain saw user, you should take several steps to keep your
cutting jobs free from accident or injury.
Kickback is the result of chain saw misuse and/or incorrect
operating procedures or conditions and can be avoided by
taking proper precautions as given below:
a) 


 Kickback forces can
be controlled by the operator, if proper precautions are
taken; do not let go of the chain saw.
b) 
height. This helps prevent unintended tip contact and
enables better control of the chain saw in unexpected
situations.
c) 
Incorrect replacement
guide bars and saw chains may cause chain breakage
and/or kickback.
d) Follow the manufacturer’s sharpening and
maintenance instructions for the saw chain.
Decreasing the depth gauge height can lead to increased
kickback.
ADDITIONAL SAFETY INSTRUCTIONS
PERSONAL SAFETY


15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 0534 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 0534 in the language / languages: All languages as an attachment in your email.

The manual is 4,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info