758635
9
Zoom out
Zoom in
Previous page
1/84
Next page
9
-the battery is nearly empty (to protect against
deep discharge) --> a low battery level or ashing low
battery level qb is shown by the battery level indicator
when pressing button L; charge battery
! 

damaged
Holding and guiding the tool
! while working, always hold the tool at the grey-
coloured grip area(s)
-for optimal results keep a 5 - 10 cm distance to the
ground
MAINTENANCE / SERVICE
This tool is not intended for professional use
Always switch o the tool, remove battery pack, and
ensure that all moving parts have come to a complete
standstill
Always keep tool clean (especially ventilation slots B 2)
-clean the tool after each use with a soft brush or a
cloth (do not use cleaning agents or solvents)
Storage r
-securely mount storage rail G on the wall with 2 screws
(not supplied) and horizontally leveled
-store the tool indoors in a dry and locked-up place, out
of reach of children
-do not cover the tool with plastic (plastic may cause
moisture with rust/corrosion as a result)
If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for SKIL
power tools
-send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of the
tool are listed on www.skil.com)
TROUBLESHOOTING
The following listing shows problem symptoms, possible
causes and corrective actions (if these do not identify
and correct the problem, contact your dealer or service
station)
! in case of electrical or mechanical malfunction,

Motor does not start or stops suddenly
-empty battery -> charge battery
-hot battery -> let battery cool down
-on/o switch defective -> contact dealer/service station
-defective motor -> contact dealer/service station
Tool operates intermittently
-on/o switch defective -> contact dealer/service station
-internal wiring defective -> contact dealer/service
station
-impeller blocked by foreign object -> remove blockage
ENVIRONMENT
Do not dispose of electric tools, batteries,
accessories and packaging together with household
waste material (only for EU countries)
-in observance of European Directive 2012/19/EC
on waste of electric and electronic equipment and
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
Only use the following batteries and chargers with
this tool
-SKIL battery: BR1*31****
-SKIL charger: CR1*31****
Do not use the battery when damaged; it should be
replaced
Do not disassemble the battery
Do not expose tool/battery to rain
Permitted ambient temperature (tool/charger/battery):
-when charging 4...40°C
-during operation –20...+50°C
-during storage –20...+50°C
EXPLANATION OF SYMBOLS ON TOOL/BATTERY
3 Read the instruction manual before use
4 Batteries may explode when disposed of in re, so do not
burn battery for any reason
5 Store tool/charger/battery in locations where temperature
will not exceed 50°C
6 
debris (keep bystanders a safe distance away from work
area)
7 Wear protective glasses and hearing protection
8 Do not expose tool to rain
9 Do not dispose of electric tools and batteries together
with household waste material
USE
Assembly instructions w
-tube D automatically ts on housing by snapping button
C
-ensure that the tube is assembled correctly
-nozzle E automatically ts on tube by snapping lock
lever e
Charging battery
! read the safety warnings and instructions
provided with the charger
Removing/installing the battery 2
On/o
-switch on tool by turning wheel A
-with wheel A the air ow control can be adjusted from 0
to high (0 – max)
! before switching on the tool, ensure that it is not
in contact with any object
! 
run for a few seconds
Battery level indicator q
-press the battery level indicator button L to show the
current battery level qa
! when the lowest level of the battery indicator
qb, the
battery is empty
! 
after pressing button L qc, the battery is not
within the allowable operating temperature range
Battery protection
The tool is suddenly being switched o or prevented from
being switched on, when
-the load is too high --> remove load and restart
-the battery temperature is not within the allowable
operating temperature range of -20 to +50°C --> 2
levels of the battery level indicator start ashing when
pressing button L qc; wait until battery has returned
within the allowable operating temperature range
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 0330 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 0330 in the language / languages: All languages as an attachment in your email.

The manual is 6,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info