701694
4
Zoom out
Zoom in
Previous page
1/44
Next page
4

LED Worklight 0320
INTRODUCTION
The worklight is intended for
illumination in dry indoor areas
This appliance is not intended for
professional use
Check whether the packaging
contains all parts as illustrated in
drawing 6
When parts are missing or damaged,
please contact your dealer
Read this instruction manual carefully
before use and save it for future
reference 2
TECHNICAL DATA 1
Dimensions (width x depth x height) :
18.5 x 21.8 x 27.5 cm
Material shielding glass : tempered glass
APPLIANCE ELEMENTS 6
A Wing nut for assembly/xation
B Lamp head
C Stand
D Wing nuts for adjusting lighting angle
E Shielding glass
SAFETY
• Handletheworklightwithcare
• Donotdirectthelightbeamat
personsoranimalsanddonot
stareintothelightbeamyourself
(notevenfromadistance)
Donotcoveroffthelamphead
whileoperatingtheworklight (the
lamp head heats up during operation
and can cause burns when the heat
accumulates)
Replace damaged shielding glasses
before using the worklight again
If the power cord is damaged, send
the worklight to a SKIL service station
(addresses are listed on www.skil.
com)
EXPLANATION OF SYMBOLS
2 Read the instruction manual before
use
3 Do not stare into the light beam
4 Replace a cracked shielding glass
5 Do not dispose of the worklight
together with household waste
material
WHEN CONNECTING NEW 3-PIN PLUG
(U.K. ONLY):
Do not connect the blue (= neutral) or
brown (= live) wire in the cord of this
appliance to the earth terminal of the
plug
If for any reason the old plug is cut o
the cord of this appliance, it must be
disposed of safely and not left
unattended
USE
Assembly 6
! ensurethattheplugis
disconnectedfromthepower
sourcebeforeassemblingthe
appliance
- rst unscrew wing nut A
- assemble lamp head B on stand C
with wing nut A as illustrated
- lock the worklight in place by
tightening wing nut A
Operating the appliance 6
- connect plug to power source
! connectthisearthedappliance
onlytoaproperlyearthed
powersupplysystem;ensure
thatsocketandextensioncable
haveafunctionalprotective
conductor
- the worklight is continuously
horizontally adjustable within its
pivoting range
- lock the worklight in place by
tightening wing nut A
- tilt the worklight into the desired
angle by loosening/tightening both
wing nuts D
MAINTENANCE / SERVICE
This appliance is not intended for
professional use
Clean the appliance with a dry or
slightly moist cloth (do not use any
abrasive or solvent-based cleaners)
! disconnecttheplugbefore
cleaning
The light source of this appliance
cannot be replaced (if the LED-light
reaches the end of its service life after
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 0320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 0320 in the language / languages: All languages as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info