757184
12
Zoom out
Zoom in
Previous page
1/132
Next page
12
! 
after pressing button AA qc, the battery is not
within the allowable operating temperature range
Battery protection
         
being switched on, when
-the load is too high --> remove load and restart
-the battery temperature is not within the allowable
operating temperature range of -20 to +50°C --> 2
        
pressing button AA qc; wait until battery has returned
within the allowable operating temperature range
-the battery is nearly empty (to protect against
deep discharge)        
battery level qb is shown by the battery level indicator
when pressing button AA; charge battery
! 

damaged
Setting the guide handle position r
-release guide handle adjustment knob C
-adjust guide handle position
-fasten guide handle adjustment knob C
Setting the tube length t
Setting the main handle orientation y
1. downwards for trimming
2. sidewards for edging
Setting the pivot function u
-set tube angle according
1. free standing storage
2. trimming in narrow spaces
3. regular trimming
4. trimming under low objects
5. edging function
   i
        
unintentional pruning
-    
       
trimming near hard obstacles
-    
Setting up the tool for trimming
-set tube length D t
-set main handle orientation in trimming position y
-use pivot position 2, 3 or 4 u
-    i
Setting up the tool for edging
-set tube length D t
-set main handle orientation in edging position y
-use pivot position 5 u
-    i
-for edging, support the tool by the edging wheel S p
Trimming
! ensure that the cutting area is free of stones,
debris and other foreign objects
! start trimming only when tool runs at full speed
-cut long grass in layers (always start from the top)
-only trim with the tip of the cutting line
-do not cut damp or wet grass
-prevent the cut grass from clogging the spool (do not
make heavy cuts)
-do not overload the tool
-carefully cut around trees and bushes, so that they do
not come into contact with the cutting line
-after striking a foreign object
-whenever the tool starts vibrating abnormally
Always ensure that the ventilation openings are kept
clear of debris
AFTER USE
Store the tool indoors in a dry and locked-up place, out
of reach of children
-store the battery pack separately from the tool
BATTERIES
The battery supplied is partially charged (to ensure
full capacity of the battery, completely charge the battery
in the battery charger before using your power tool for the
 
Only use the following batteries and chargers with
this tool
-SKIL battery: BR1*31****
-SKIL charger: CR1*31****
Do not use the battery when damaged; it should be
replaced
Do not disassemble the battery
Do not expose tool/battery to rain
Permitted ambient temperature (tool/charger/battery):
-when charging 4...40°C
-during operation –20...+50°C
-during storage –20...+50°C
EXPLANATION OF SYMBOLS ON TOOL/BATTERY
3 Read the instruction manual before use
4           
burn battery for any reason
5 Store tool/charger/battery in locations where temperature
will not exceed 50°C
6 
debris (keep bystanders a safe distance away from work
area)
7 Wear protective glasses and hearing protection
8 Do not expose tool to rain
9 Do not dispose of electric tools and batteries together
with household waste material
USE
Assembly instructions
-mount cutting guard A as illustrated with 2 screws wa
! never use the tool without cutting guard A
-    wb
-mount the guide handle B as illustrated r
Charging battery
! read the safety warnings and instructions
provided with the charger
Removing/installing the battery 2
 e
-          
        
-       
! 
continues to rotate for a few seconds
-allow the cutting line to stop rotating before switching
on again
! 
Battery level indicator q
-press the battery level indicator button AA to show the
current battery level qa
! when the lowest level of the battery indicator
qb, the
battery is empty
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skil 0230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skil 0230 in the language / languages: All languages as an attachment in your email.

The manual is 4,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info