527729

Sitecom WLX-3000B - N300 Manual

29
Zoom out
Zoom in
Previous page
1/66
Next page
WLX-3000B
Revision 2.0
© Sitecom Europe BV 2012
Note: All the information contained in this manual was correct at the time of
publication.
However, as our engineers are always updating and improving the product, your
device’s software may have a slightly different appearance or modified
functionality than presented in this manual.
Table of Contents
Table of Contents
Introduction .................................................................................................................. 8
1 KEY FEATURES ...........................................................................................................9
2 PACKAGE CONTENTS ............................................................................................... 10
3 CAUTIONS .............................................................................................................. 11
3.1 Usage Cautions .................................................................................................. 11
3.2 Power .................................................................................................................... 11
3.3 Repair ................................................................................................................... 11
3.4 Disposing of the Access Point ....................................................................... 12
3.5 Others ................................................................................................................... 12
4 PRODUCT LAYOUT................................................................................................... 13
LED Definition ............................................................................................................ 14
5 NETWORK + SYSTEM REQUIREMENTS ...................................................................... 15
6 WLR-3000B PLACEMENT ......................................................................................... 16
7 CONNECT BEFORE USE. ........................................................................................... 17
8 PC NETWORK ADAPTER SETUP FOR FIRST SETUP ..................................................... 18
9 BRINGING UP THE WLR-3000B ................................................................................ 25
10 INITIAL SETUP WLR-3000B ................................................................................... 25
LOGIN procedure ...................................................................................................... 25
11 STATUS ...................................................................................................................... 27
System Status ................................................................................................................. 27
DHCP Server .................................................................................................................... 28
Device Status .................................................................................................................. 30
DHCP Status .................................................................................................................... 30
Log .................................................................................................................................. 32
Statistics ......................................................................................................................... 33
12 WIRELESS SETTINGS ................................................................................................... 33
Enable ............................................................................................................................. 34
Basic ............................................................................................................................... 35
Advanced ........................................................................................................................ 36
Security ........................................................................................................................... 38
ACL ................................................................................................................................. 43
WPS ................................................................................................................................ 45
13 TOOLBOX .................................................................................................................. 47
Password ........................................................................................................................ 47
Timezone ........................................................................................................................ 48
Firmware ........................................................................................................................ 49
Back-up ........................................................................................................................... 50
Reset............................................................................................................................... 51
LED Control ..................................................................................................................... 51
Diagnostics ...................................................................................................................... 52
14 SETTING PC NETWORK SETTINGS TO DYNAMIC IP ....................................................... 53
Introduction
Congratulations on your purchase of the WLR-3000B Wireless N300 Ceiling
Access Point . The WLR-3000B is compliant with 802.11n and up to 6 times
faster than standard 802.11g based devices while still being compatible with
802.11g & 802.11b devices.
At 300 Mbps wireless transmission rate, the Access Point advanced MIMO
(Multi-Input, Multi-Output) technology to transmit multiple streams of data in
a single wireless channel, giving you seamless access to multimedia content.
The robust RF signal travels farther, eliminates dead spots and extends the
network range. For data protection and privacy, the WLR-3000B encodes all
wireless transmissions with WEP, WPA, or WPA2 encryption.
1 Key Features
Features Advantages
Incredible Data Rate up to
300Mbps*
Heavy data payloads such as
MPEG video streaming
IEEE 802.11n Compliant and
backwards compatible with
802.11b/g
Fully Interoperable with IEEE
802.11b / IEEE802.11g
compliant devices with legacy
protection
Support 802.1x authenticator,
802.11i (WPA/WPA2, AES), VPN
pass-through
Provide mutual authentication
(Client and dynamic encryption
keys to enhance security
WDS (Wireless Distribution System)
Make wireless AP and Bridge
mode simultaneously as a
wireless repeater
* Theoretical wireless signal rate based on IEEE standard of 802.11b, g, n chipset used. Actual
throughput may vary. Network conditions and environmental factors lower actual throughput rate.
All specifications are subject to change without notice.
2 Package Contents
Open the package carefully, and make sure that none of the items listed
below are missing. Do not discard the packing materials, in case of return;
the unit must be shipped back in its original package.
1. The WLR-3000B Access Point
2. A 110V~240V to 12V 1A Switching Power Adapter
3. A Quick Install Guide
4. A CD (User’s Manual)
5. A Warranty card
6. An UTP cable
3 Cautions
This Access Point’s design and manufacturer has your safety in mind. In order
to safely and effectively use this Access Point, please read the following
before usage.
3.1 Usage Cautions
The user should not modify this Access Point. The environmental temperature
should be within +5 ~ +35 degrees Celsius.
3.2 Power
The Access Point’s power voltage is DC 12V 1A.
When using this router, please connect the supplied AC adapter or AC adapter
cable to the router’s power jack. When placing the adapter cable, make sure
it can not get damaged or be subject to pressure. To reduce the risk of
electric shock, unplug the adapter first before cleaning it. Never connect the
adapter to the router in a humid or dusty area. Do not replace the adapter or
cable’s wire or connector.
The Device can also be powered via Ethernet via a PoE injector. Please make
sure this device is 802.3af compatible.
3.3 Repair
If the Access Point has a problem, you should take it to an appointed repair
centre and let the specialists do the repair. Never repair the Access Point
yourself, you might damage the Access Point or endanger yourself.
3.4 Disposing of the Access Point
When you dispose the Access Point , be sure to dispose it appropriately. Some
countries may regulate disposal of an electrical device, please consult with
your local authority.
3.5 Others
When using this Access Point, please do not let it come into contact with
water or other liquids. If water is accidentally spilled on the Access Point,
please use a dry cloth to absorb the spillage. Electronic products are
vulnerable, when using please avoid shaking or hitting the Access Point, and
do not press the buttons too hard.
- Do not let the Access Point come into contact with water or other liquid.
- Do not disassemble, repair or change the design of the Access Point, any
damage done will not be included in the repair policy.
- Avoid hitting the Access Point with a hard object, avoid shaking the Access
Point and stay away from magnetic fields.
- If during electrostatic discharge or a strong electromagnetic field the
product will malfunction, unplug the power cable. The product will return to
normal performance the next time it is powered on.
4 Product Layout
Port
Description
Power connector Connect the 12V DC adapter to this port
Ethernet Connect your ADSL/Cable modem to this port
LED Definition
Port
Description
Ethernet
(
Blue
)
Shows the
cable is connected.
WiFi (Blue) Shows WiFi activity.
Power (Blue) Shows the device is turned on.
5 Network + System Requirements
To begin using the WLR-3000B, make sure you meet the following as
minimum requirements:
• PC/Notebook.
• Operating System – Microsoft Windows XP/Vista/Seven
• 1 Free Ethernet port.
• WiFi card/USB dongle (802.11 b/g/n) – optional.
• External xDSL (ADSL) or Cable modem with an Ethernet port (RJ-45).
• PC with a Web-Browser (Internet Explorer, Safari, Firefox, Opera)
• Ethernet compatible CAT5e cables.
6 WLR-3000B Placement
The WLX-3000B is intended for placement on the ceiling. For optimal
performance, place your Wireless Access Point in the center of your home (or
your office) in a location that is away from any potential source of
interference, such as a metal wall or microwave oven.
7 Connect before use
8
PC Network Adapter setup for first setup
To configure the WLX-3000B for the first time it is advised to set your pc to a static IP
address as explained in the following steps.
Windows XP
• Enter [Start Menu] select [Control panel] select [Network].
•
Select [Local Area Connection]) icon=>select [properties]
• Select [Internet Protocol (TCP/IP)] =>Click [Properties].
• Select the [General] tab.
Select ‘Use the following IP address’, then input the following settings in the
respective fields:
IP address: 192.168.0.2
Subnet Mask: 255.255.255.0
Click ‘OK’ when finished.
Windows Vista/Seven
• Enter [Start Menu] select [Control panel] select [View network status
and tasks] -> select [Manage network connections].
• Select [Local Area Connection]) icon=>select [properties]
• Select [Internet Protocol Version 4 (TCP/IPv4)] =>Click [Properties].
• Select the [General] tab.
Select ‘Use the following IP address’, then input the following settings
in respective fields:
IP address: 192.168.0.2
Subnet Mask: 255.255.255.0
Click ‘OK’ when finished.
MAC OS
• Click on ‘System preferences’.
• Click on ‘Network’.
Select Configure IPv4 : ‘Manually’, then input the following settings in
respective fields:
IP address: 192.168.0.2
Subnet Mask: 255.255.255.0
Click ‘Apply’ when finished.
Please note once the WLX-3000B has been set up for use and placed on
the desired location, the static IP address is no longer required. See
Chapter 14 for Setting PC Network settings to dynamic IP.
9 Bringing up the WLR-3000B
For initial setup it is advised to set the computer to a local Ip address within
the range of the Access point (192.168.0.x) as explained in chapter 8. After
setting the computer to the local IP the WLX-3000B can be directly connected
to the PC via a network cable.
Connect the supplied power-adapter to the power inlet port and connect it to
a wall outlet. Switch on the power via the switch on the back of the device.
The WLR-3000B automatically enters the self-test phase. During self-test
phase, the Power LED will be lit continuously to indicate that this product is in
normal operation.
10 Initial Setup WLR-3000B
LOGIN procedure
1. OPEN your browser (e.g. Internet Explorer).
2. Type http://192.168.0.234 in the address bar and press [Enter]
3. Type user name and password (default username is ‘admin’, the
password can be found on the back of the Access Point).
4. Click OK.
5. You will see the home page of the WLR-3000B.
11 Status
System Status
Operation Mode The device is currently in which
mode.
System Time The device’s system time. If this is
incorrect, please set the time in the
Tools / Time page.
Hardware Version Hardware information for this
device.
Root code, Runtime code version Firmware information for this device.
DHCP Server
The DHCP server tab gives you the opportunity to change the IP settings of the WLR-
3000B.
Click <Apply> at the bottom of this screen to save any changes.
Bridge type
IP address 192.168.0.1. It is the router’s LAN IP address (Your LAN clients default
gateway IP address).
IP Subnet Mask 255.255.255.0 Specify a Subnet Mask for your LAN segment.
802.1d Spanning Tree is Disabled by default. If the 802.1d Spanning Tree function is
enabled, this router will use the spanning tree protocol to prevent network loops.
DHCP Server Enabled by default. You can enable or disable the DHCP server. When
DHCP is disabled no ip-addresses are assigned to clients and you have to use static ip-
addresses. When DHCP server is enabled your computers will be assigned an ip-
address automatically until the lease time expires.
Lease Time Forever. In the Lease Time setting you can specify the time period that
the DHCP lends an IP address to your LAN clients. The DHCP will change your LAN
client’s IP address when this time threshold period is reached.
IP Address Pool You can select a particular IP address range for your DHCP server to
issue IP addresses to your LAN Clients.
Note: default IP range is 192.168.0.100 ~ 192.168.0.200. If you want your
PC(s) to have a static/fixed IP address, then you’ll have to choose an IP
address outside this IP address Pool
Domain Name You can specify a Domain Name for your LAN or just keep the default
(sitecomwlx3000B).
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom WLX-3000B - N300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom WLX-3000B - N300 in the language / languages: English as an attachment in your email.

The manual is 4,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info