648546

Sitecom WLX-1000 - Wi-Fi range extender N300 Manual

24
Zoom out
Zoom in
Previous page
1/35
Next page
WLX-1000
Wi-Fi range extender N300
Introduction
Thank you for purchasing the Sitecom WLX-1000 Wall Mount Range Extender N300. With
this product you can easily double the signal coverage of your Wi-Fi network for better
Wi-Fi quality in homes with many rooms or multiple floors. With both a Wi-Fi extender
and a power adapter in a compact design, the WLX-1000 can be plugged directly into an
electrical outlet for convenient placement. The smart signal strength LED makes it easy
for you to set it up where your Wi-Fi signal needs enhancement. Additionally, it complies
with wireless 802.11b/g/n standards and can create an extended Wi-Fi network with data
transmission rates of up to 300Mbps. With the WLX-1000, you can enjoy high-speed
wireless networking throughout your home without additional cabling.
The WLX-1000 features a WPS button which allows you to set up the extender quick and
easy. Alternatively, the software wizard automatically detects the available Wi-Fi
networks nearby and helps you establish a connection within seconds. The WPS button
also allows you to connect the extender to the root access point with a simple click of a
button. Additionally, the WLX-1000 is designed with a signal strength LED, which helps
you find the best setup location for optimal Wi-Fi coverage.
Not only is the WLX-1000 very compact, it is designed with a built-in power adapter. This
design allows you to plug it directly into an electrical outlet, eliminating the need for an
additional power cable. You can easily install it where your Wi-Fi signal needs
enhancement and enjoy high-speed wireless performance without any hassles.
The latest 802.11n technology is built into the WLX-1000 to broaden its wireless
coverage and to eliminate dead spots within the wireless range. The WLX-1000 complies
with wireless 802.11b/g/n standards and can reach data transmission rates of up to
300Mbps when connected to wireless 802.11n devices. It provides faster and more
reliable wireless connections than standard 802.11b/g wireless networks.
This product can be used safely in the countries listed below:
This product complies with the following European Union regulations:
Table of Contents
1 KEY FEATURES ........................................................................................ 6
2 PACKAGE CONTENTS ............................................................................... 7
3 CAUTIONS .............................................................................................. 8
4 PRODUCT LAYOUT ................................................................................... 9
5 NETWORK + SYSTEM REQUIREMENTS ..................................................... 11
6 WLX-1000 PLACEMENT ........................................................................... 11
7 PC NETWORK ADAPTER SETUP ................................................................ 12
8 BRINGING UP THE WLX-1000 .................................................................. 16
9 INITIAL SETUP WLX-1000 ....................................................................... 17
10 CONFIGURATION WIZARD .................................................................... 19
11 BASIC SETTINGS ................................................................................. 21
12 ADVANCED SETTINGS .......................................................................... 23
13 TOOLBOX SETTINGS ............................................................................ 30
1 KEY FEATURES
Features
Advantages
Incredible Data Rate up to
300Mbps*
Heavy data payloads such as MPEG
video streaming
IEEE 802.11n Compliant and
backwards compatible with
802.11b/g
Fully Interoperable with IEEE
802.11b / IEEE802.11g compliant
devices with legacy protection
Support 802.1x authenticator,
802.11i (WPA/WPA2, AES)
Provide mutual authentication (Client
and dynamic encryption keys to
enhance security
Easy to use web-based GUI
Graphical User Interface for network
configuration and management
purposes.
WPS Button
Easily connect the device to your
existing network and your clients
with just the push of a button.
* Theoretical wireless signal rate based on IEEE standard of 802.11b, g, n chipset used.
Actual throughput may vary. Network conditions and environmental factors lower actual
throughput rate. All specifications are subject to change without notice.
2 PACKAGE CONTENTS
Open the package carefully, and make sure that none of the items listed below are
missing. Do not discard the packing materials, in case of return; the unit must be
shipped back in its original package.
1. The WLX-1000 Wall Mount Range Extender N300
2. A Quick Install Guide
3. An UTP cable
3 CAUTIONS
This device’s design and manufacturer has your safety in mind. In order to safely and
effectively use this device, please read the following before usage.
3.1 Usage Cautions
The user should not modify this device. The environmental temperature should be within +5
~ +35 degrees Celsius.
3.2 Power
The device’s power voltage is AC 230v. When plugging in the device, make sure it cannot get
damaged or be subject to pressure. To reduce the risk of electric shock, unplug the device
first before cleaning it. Never connect the device to the power in a humid or dusty area.
3.3 Repair
If the device has a problem, you should take it to an appointed repair center and let the
specialists do the repair. Never repair the device yourself, you might damage the device or
endanger yourself.
3.4 Disposing of the device
When you dispose of the device, be sure to dispose of it appropriately. Some countries may
regulate disposal of an electrical device, please consult with your local authority.
3.5 Others
When using this device, please do not let it come into contact with water or other liquids. If
water is accidentally spilled on the device, please use a dry cloth to absorb the spillage.
Electronic products are vulnerable, when using please avoid shaking or hitting the device, and
do not press the buttons too hard.
Do not let the device come into contact with water or other liquid.
Do not disassemble, repair or change the design of the device, any damage done will
not be included in the repair policy.
Avoid hitting the device with a hard object, avoid shaking the device and stay away
from magnetic fields.
If during electrostatic discharge or a strong electromagnetic field the device will
malfunction, unplug the power cable. The product will return to normal performance
the next time it is powered on.
4 PRODUCT LAYOUT
Network Port
OPS Button
LED Description
From left to right:
LED
Color
Description
Power
Green
Lights up when powered ON. Blinks on TEST/RESET.
OPS
Green
Blinks when OPS mode is on.
LAN
Green
Lights up when a LAN cable is connected.
Signal
Green
This LED shows the quality of the signal it receives from your
Router/Access Point.
0-25%: 250 milliseconds ON – 250 millisecond OFF
25-50%: 1000 milliseconds ON – 1000 milliseconds OFF
50-100%: Continuous ON
5 NETWORK + SYSTEM REQUIREMENTS
To begin using the WLX-1000, make sure you meet the following as minimum requirements:
PC/Notebook.
1 Free Ethernet port.
WiFi card/USB dongle (802.11 b/g/n) – optional.
PC with a Web-Browser (Internet Explorer, Safari, Firefox, Opera)
Ethernet compatible CAT5 cables.
Router or Access Point
6 WLX-1000 PLACEMENT
You can place the WLX-1000 directly in a wall socket. For optimal performance, place
your Range Extender in a location that is away from any potential source of interference,
such as a metal wall or microwave oven. This location must be within a good signal range
from your existing router or access point, preferably above 50% signal strength.
7 PC NETWORK ADAPTER SETUP
Windows XP
Enter [Start Menu] -> select [Control panel] -> select [Network].
Select [Local Area Connection]) icon -> select [properties]
Select [Internet Protocol (TCP/IP)] =>Click [Properties].
Select the [General] tab.
The device supports the [DHCP] function, please select both [Obtain an IP address
automatically] and [Obtain DNS server address automatically].
Windows Vista/Seven
Enter [Start Menu] -> select [Control panel] -> select [View network status and
tasks] -> select [Manage network connections].
Select [Local Area Connection]) icon -> select [properties]
Select [Internet Protocol Version 4 (TCP/IPv4)] -> Click [Properties].
Select the [General] tab.
The device supports the [DHCP] function, please select both [Obtain an IP address
automatically] and [Obtain DNS server address automatically].
8 BRINGING UP THE WLX-1000
You can plug the WLX-1000 directly into a wall outlet. Switch the device on with the
power switch located on the bottom of the device. The WLX-1000 automatically enters
the self-test phase. During self-test phase, the Power LED will be lit continuously to
indicate that this product is in normal operation.
9 INITIAL SETUP WLX-1000
LOGIN procedure
1. OPEN your browser (e.g. Internet Explorer).
2. Type http://sitecom.extender in the address bar and press [Enter]
3. Type user name and password (default is admin/admin).
4. Click OK.
5. You will see the home page of the WLX-1000.
The System status section allows you to monitor the current status of your device,
the UP time, hardware information, serial number as well as firmware version
information is displayed here.
10 CONFIGURATION WIZARD
With the wizard you can configure the Range Extender to connect to your existing
network. Click Wizard to start configuring the WLX-1000. The Setup wizard will now be
displayed.
On the first page you can select the network that the Range Extender needs to connect
to. You can also see the signal strength, the channel and the encryption type used on the
networks surrounding the Range Extender.
Select your network from the list. Click Next.
Fill in the security key from your existing network. Please refer to the manual of your
router or access point on how to retrieve this key. Click Next.
On this last page you will see the new settings of your Range Extender. You can use
these settings on your computer to connect to the Range Extender. You can use the
“Copy to Clipboard” button to copy the wireless password to your clipboard so you don’t
have to type it in.
11 BASIC SETTINGS
Band Please select the wireless band you wish to use. By selecting a
different band setting, you’ll be able to allow or deny the wireless
clients on a certain band.
MAIN ESSID Please input the ESSID (the name used to identify this wireless
access point) here. You can input up to 32 alphanumerical
characters. PLEASE NOTE THAT THE ESSID IS CASE SENSITIVE.
Channel Number Please select a channel number you wish to use. The channel
number must be same as the wireless access point you wish to
connect.
Associated Clients Click ‘Show Active Clients’ button and a new popup window will
appear which contains the information about all wireless clients
connected to this access point.
You can click the ‘Refresh’ button in the popup window to keep the
information up-to-date
Root AP SSID In ‘Universal Repeater’ mode, this device can act as a station to
connect to a Root AP. You should assign the SSID of the Root AP
here or click ‘Select Site Survey’ button to choose a Root AP.
Site Survey Click ‘Site Survey’ button, then a “Wireless Site Survey Table” will
pop up. It will list all available access points nearby. You can select
one access point in the table and the access point will join wireless
LAN through this access point.
12 ADVANCED SETTINGS
Security
This device provides many types of wireless security (wireless data encryption). When
you use data encryption, data transferred by radio signals in the air will become
unreadable for those people who don’t know the correct encryption key (encryption
password).
There are three types of security level you can select: Disable (no security - data
encryption disabled), WEP and WPA Pre-shared Key. Please refer to the following sections
for detailed instructions.
Disabled
When you select ‘Disabled’, wireless encryption for the network is disabled. This is not
recommended.
Click <Apply> at the bottom of the screen to save the above configuration. You can now
configure other sections by choosing Continue, or choose Apply to apply the settings and
reboot the device.
WEP
Key Length You can select the WEP key length for encryption, 64-bit or 128-bit. The
larger the key will be the higher level of security is used, but the
throughput will be lower.
Key Format You may select ASCII Characters (alphanumeric format) or Hexadecimal
Digits (in the "A-F", "a-f" and "0-9" range) to be the WEP Key.
Key1 - Key4The WEP keys are used to encrypt data transmitted in the wireless network.
Use the following rules to setup a WEP key on the device.64-bit WEP: input
10-digits Hex values (in the "A-F", "a-f" and "0-9" range) or5-digit ASCII
character as the encryption keys. 128-bit WEP: input 26-digitHex values (in
the "A-F", "a-f" and "0-9" range) or 13-digit ASCII characters as the
encryption keys.
Click <Apply> at the bottom of the screen to save the above configuration. You can now
configure other sections by choosing Continue, or choose Apply to apply the settings and
reboot the device.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom WLX-1000 - Wi-Fi range extender N300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom WLX-1000 - Wi-Fi range extender N300 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info