648539

Sitecom WLR-9500 AC2600 WiFi Router Manual

26
Zoom out
Zoom in
Previous page
1/52
Next page
• Guest IP address: The gateway address for the Guest Network. This address cannot
be the same as the default router’s IP Address.
• Guest Subnet Mask: The Subnet Mask for the Guest network. This address cannot be
the same as the default router’s Subnet Mask.
• Guest Lease Time: One Week. In the Lease Time setting you can specify the time
period that the DHCP lends an IP address to your LAN clients. The DHCP will change
your LAN client’s IP address when this time threshold period is reached.
• Guest Start IP + End IP: You can select a particular IP address range for your DHCP
server to issue IP addresses to your LAN Clients. The default IP range is
192.168.169.100 ~ 192.168.169.200. This address pool cannot be the same as the
default router’s DHCP Address pool.
• Guest SSID: This is the name of the wireless signal which is broadcasted as the Guest
Network. This name cannot be the same as the default SSID.
Advanced Settings
This tab allows you to set the advanced wireless options. The options included are, Fragment
Threshold, RTS Threshold, Beacon Interval, and Preamble Type. You should not change these
parameters unless you know what effect the changes will have on the router.
• Fragment Threshold: "Fragment Threshold" specifies the maximum size of a packet
during the fragmentation of data to be transmitted. If you set this value too low, it
will result in bad performance.
• RTS Threshold: When the packet size is smaller then the RTS threshold, the wireless
router will not use the RTS/CTS mechanism to send this packet.
• Beacon Interval: This is the interval of time that this wireless router broadcasts a
beacon. A Beacon is used to synchronize the wireless network.
• Data Rate: The “Data Rate” is the rate that this access point uses to transmit data
packets. The access point will use the highest possible selected transmission rate to
transmit the data packets.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom WLR-9500 AC2600 WiFi Router at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom WLR-9500 AC2600 WiFi Router in the language / languages: English as an attachment in your email.

The manual is 4,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info