462892
61
Zoom out
Zoom in
Previous page
1/62
Next page
WLR-1000/2000/3000
Wireless Broadband Router
(802.11b/g/n)
2
User Manual
T
ABLE OF
C
ONTENTS
1
KEY FEATURES......................................................................................................................... 4
2
PACKAGE CONTENTS............................................................................................................. 5
3
PRODUCT LAYOUT.................................................................................................................. 6
4
NETWORK + SYSTEM REQUIREMENTS............................................................................ 9
5
WLR-1000/2000/3000 PLACEMENT........................................................................................ 9
6
SETUP LAN, WAN.................................................................................................................... 10
7
PC NETWORK ADAPTER SETUP (WINDOWS XP)............................................................11
8
BRING UP WLR-1000/2000/3000 ............................................................................................ 15
9
INITIAL SETUP WLR-1000/2000/3000 .................................................................................. 15
10
CONFIGURATION WIZARD................................................................................................. 24
11
WIRELESS SETTINGS............................................................................................................ 26
12
FIREWALL SETTINGS ........................................................................................................... 36
13
ADVANCED SETTINGS.......................................................................................................... 42
14
TOOLBOX SETTINGS ............................................................................................................ 52
Revision:1.1
3
Introduction
Congratulations on your purchase of the WLR-1000/2000/3000 Wireless
Network Broadband Router. The WLR-1000/2000/3000 is compliant with
802.11n and up to 6 times faster than standard 802.11g based routers while
still being compatible with 802.11g & 802.11b. The WLR-1000/2000/3000 is
not only a Wireless Access Point, but also doubles as a 4-port full-duplex
Switch that connects your wired-Ethernet devices together.
At 300 Mbps (150 Mbps for the WLR-1000) wireless transmission rate, the
Access Point built into the Router uses advanced MIMO (Multi-Input, Multi-
Output) technology to transmit multiple steams of data in a single wireless
channel, giving you seamless access to multimedia content. Robust RF signal
travels farther, eliminates dead spots and extends network range. For data
protection and privacy, the WLR-1000/2000/3000 encodes all wireless
transmissions with WEP, WPA, and WPA2 encryption.
With the inbuilt DHCP Server & powerful SPI firewall, the WLR-
1000/2000/3000 protects your computers against intruders and most known
Internet attacks but provides safe VPN pass-through. With incredible speed
and QoS function of 802.11n(draft2.0), the WLR-1000/2000/3000 is ideal for
media-centric applications like streaming video, gaming, and VoIP telephony
to run multiple media-intense data streams through the network at the same
time, with no degradation in performance.
4
1 Key Features
Features Advantages
Incredible Data Rate up to
300Mbps* (150Mbps for WLR-1000)
Heavy data payloads such as MPEG
video streaming
IEEE 802.11n compliant and
backwards compatible with
802.11b/g
Fully Interoperable with IEEE
802.11b / IEEE802.11g compliant
devices with legacy protection
Four 10/100 Mbps Fast Switch Ports
(Auto-Crossover)
Scalability, extend your network.
Firewall supports Virtual Server
Mapping, DMZ, IP Filter, ICMP
Blocking, SPI
Avoids the attacks of Hackers or
Viruses from Internet
Support 802.1x authenticator,
802.11i (WPA/WPA2, AES), VPN
pass-through
Provide mutual authentication (Client
and dynamic encryption keys to
enhance security
WDS (Wireless Distribution System) Make wireless AP and Bridge mode
simultaneously as a wireless
repeater
* Theoretical wireless signal rate based on IEEE standard of 802.11a, b, g, n chipset used. Actual
throughput may vary. Network conditions and environmental factors lower actual throughput rate.
All specifications are subject to change without notice.
5
2 Package Contents
Open the package carefully, and make sure that none of the items listed
below are missing. Do not discard the packing materials, in case of return;
the unit must be shipped back in its original package.
1. WLR-1000/2000/3000 Router
2. 5V 1A Power Adapter
3. Quick Install Guide
4. CD (User’s Manual)
5. Warranty card
6. UTP cable
6
3 Product Layout
Port Description
Power connector Connect the 5V DC adapter to this port
WAN (Blue) Connect your ADSL/Cable modem to this port
LAN (Yellow) Connect your PC’s or network devices to this port
7
Backlabel
The backlabel describes the IP address, login details, SSID, security code and
WPS button functionality.
Button Description
WPS BUTTON
Press 2 seconds for WPS mode
Press 10 seconds to reset the router
Press 15 Seconds to reset the router to factory defaults.
8
LED Definition
From left to right.
Port Description
LAN (Blue) Shows the cable is connected.
LAN (Blue) Shows the cable is connected.
LAN (Blue) Shows the cable is connected.
LAN (Blue) Shows the cable is connected.
WAN (Blue) Shows the cable is connected.
WiFi (Blue) Shows WiFi activity and WPS.
Power (Red) Shows the device is turned on.
9
4 Network + System Requirements
To begin using the WLR-1000/2000/3000, make sure you meet the following
as minimum requirements:
PC/Notebook.
Operating System – Microsoft Windows XP/2000/VISTA
1 Free Ethernet port.
WiFi card/USB dongle (802.11 b/g/n) – optional.
External xDSL (ADSL) or Cable modem with an Ethernet port (RJ-45).
PC with a Web-Browser (Internet Explorer, Safari, Firefox, Opera)
Ethernet compatible CAT5 cables.
5 WLR-1000/2000/3000 Placement
You can place the WLR-1000/2000/3000 on a desk or other flat surface, or
you can mount it on a wall. For optimal performance, place your Wireless
Broadband Router in the center of your office (or your home) in a location
that is away from any potential source of interference, such as a metal wall or
microwave oven. This location must be close to a power connection and your
ADSL/Cable modem.
10
6 Setup LAN, WAN
WAN connection:
LAN connection:
11
7 PC Network Adapter setup
Windows XP
Enter [Start Menu] select [Control panel] select [Network].
Select [Local Area Connection]) icon=>select [properties]
12
Select [Internet Protocol (TCP/IP)] =>Click [Properties].
Select the [General] tab.
The router supports [DHCP] function, please select both [Obtain an IP
address automatically] and [Obtain DNS server address automatically].
13
Windows Vista/Seven
Enter [Start Menu] select [Control panel] select [View network status
and tasks] -> select [Manage network connections].
Select [Local Area Connection]) icon=>select [properties]
14
Select [Internet Protocol Version 4 (TCP/IPv4)] =>Click [Properties].
Select the [General] tab.
The router supports [DHCP] function, please select both [Obtain an IP address
automatically] and [Obtain DNS server address automatically].
15
8 Bring up the WLR-1000/2000/3000
Connect the supplied power-adapter to the power inlet port and connect it to
a wall outlet. The WLR-1000/2000/3000 automatically enters the self-test
phase. During self-test phase, the Power LED will be lit continuously to
indicate that this product is in normal operation.
9 Initial Setup WLR-1000/2000/3000
LOGIN procedure
1. OPEN your browser (e.g. Internet Explorer).
2. Type http://192.168.0.1 in the address bar and press [Enter]
16
3. Type user name and password (default username is admin. The password
can be found on the backlabel on the bottom of your router).
4. Click OK.
5. You will see the home page of the WLR-1000/2000/3000.
The System status section allows you to monitor the current status of your router
the UP time, hardware information, serial number as well as firmware version
information is displayed here.
17
LAN settings
The LAN tab gives you the opportunity to change the IP settings of the WLR-
1000/2000/3000.
Click <Apply> at the bottom of this screen to save any changes.
IP address 192.168.0.1. It is the router’s LAN IP address (Your LAN clients default
gateway IP address).
IP Subnet Mask 255.255.255.0 Specify a Subnet Mask for your LAN segment.
802.1d Spanning Tree is Disabled by default. If the 802.1d Spanning Tree
function is enabled, this router will use the spanning tree protocol to prevent
network loops.
DHCP Server Enabled by default. You can enable or disable the DHCP server.
When DHCP is disabled no ip-addresses are assigned to clients and you have to
use static ip-addresses. When DHCP server is enabled your computers will be
assigned an ip-address automatically until the lease time expires.
22
WLR-1000/2000/3000 Log
View the operation log of the WLR-1000/2000/3000. This page shows the current
system log of the Broadband router. It displays any event occurred after system start
up. At the bottom of the page, the system log can be saved <Save> to a local file for
further processing or the system log can be cleared <Clear> or it can be refreshed
<Refresh> to get the most updated information. When the system is powered down,
the system log will disappear if not saved to a local file.
23
WLR-1000/2000/3000 Statistics
Shows the counters of packets sent and received on WAN, LAN & WLAN.
24
10 Configuration Wizard
Click Wizard to configure the router. The Setup wizard will now be displayed;
check that the modem is connected and click Next.
Select your country from the Country list. Select your internet provider. Click
Next.
Depending on the chosen provider, you may need to enter your user name
and password, MAC address or hostname in the following window. After you
have entered the correct information, click Next.
25
Click APPLY to complete the configuration.
61
it. Thus, it is not the intent of this section to claim rights or contest your rights to work written
entirely by you; rather, the intent is to exercise the right to control the distribution of derivative
or collective works based on the Program. In addition, mere aggregation of another work not
based on the Program with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under the scope of this License.
3.
You may copy and distribute the Program (or a work based on it, under Section 2) in object
code or executable form under the terms of Sections 1 and 2 above provided that you also do
one of the following: a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or, b) Accompany it with a written offer, valid for at
least three years, to give any third party, for a charge no more than your cost of physically
performing source distribution, a complete machine-readable copy of the corresponding source
code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily
used for software interchange; or, c) Accompany it with the information you received as to the
offer to distribute corresponding source code. (This alternative is allowed only for
noncommercial distribution and only if you received the program in object code or executable
form with such an offer, in accord with Subsection b above.) The source code for a work means
the preferred form of the work for making modifications to it. For an executable work, complete
source code means all the source code for all modules it contains, plus any associated interface
definition files, plus the scripts used to control compilation and installation of the executable.
However, as a special exception, the source code distributed need not include anything that is
normally distributed (in either source or binary form) with the major components (compiler,
kernel, and so on) of the operating system on which the executable runs, unless that
component itself accompanies the executable. If distribution of executable or object code is
made by offering access to copy from a designated place, then offering equivalent access to
copy the source code from the same place counts as distribution of the source code, even
though third parties are not compelled to copy the source along with the object code.
4.
You may not copy, modify, sublicense, or distribute the Program except as expressly provided
under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program
is void, and will automatically terminate your rights under this License. However, parties who
have received copies, or rights, from you under this License will not have their licenses
terminated so long as such parties remain in full compliance.
5.
You are not required to accept this License, since you have not signed it. However, nothing else
grants you permission to modify or distribute the Program or its derivative works. These actions
are prohibited by law if you do not accept this License. Therefore, by modifying or distributing
the Program (or any work based on the Program), you indicate your acceptance of this License
to do so, and all its terms and conditions for copying, distributing or modifying the Program or
works based on it.
6.
Each time you redistribute the Program (or any work based on the Program), the recipient
automatically receives a license from the original licensor to copy, distribute or modify the
Program subject to these terms and conditions. You may not impose any further restrictions on
the recipients' exercise of the rights granted herein. You are not responsible for enforcing
compliance by third parties to this License.
7.
If, as a consequence of a court judgment or allegation of patent infringement or for any other
reason (not limited to patent issues), conditions are imposed on you (whether by court order,
agreement or otherwise) that contradict the conditions of this License, they do not excuse you
from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your
obligations under this License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent license would not permit royalty-
free redistribution of the Program by all those who receive copies directly or indirectly through
you, then the only way you could satisfy both it and this License would be to refrain entirely
from distribution of the Program. If any portion of this section is held invalid or unenforceable
under any particular circumstance, the balance of the section is intended to apply and the
section as a whole is intended to apply in other circumstances. It is not the purpose of this
section to induce you to infringe any patents or other property right claims or to contest validity
of any such claims; this section has the sole purpose of protecting the integrity of the free
software distribution system, which is implemented by public license practices. Many people
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom WLR-3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom WLR-3000 in the language / languages: English as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info