527714

Sitecom WLM-3600 - X3 N300 Manual

30
Zoom out
Zoom in
Previous page
1/71
Next page
Allow: Only allow the wireless clients with the MAC Address you have specified can
access to the router.
Deny: The wireless clients with the MAC Address you have specified will be denied
accessing to the router.
MAC Address: Enter the MAC Address of the wireless clients for the filtering control.
When you finish, click „Submit‟ to save the settings made and restart the router so the
settings will take effect after it reboots.
Advanced Wireless
This page allows advanced users who have sufficient knowledge of wireless LAN. These
setting shall not be changed unless you know exactly what will happen for the changes
you made on your router.
Transmit Power: Set the maximum output power of the router. The higher output
power, the wider the coverage range is.
Beacon Interval: The interval of time that this wireless router broadcast a beacon.
Beacon is used to synchronize the wireless network. The range for the beacon period is
between 20 and 1024 with a default value of 100 (milliseconds).
RTS/CTS Threshold: This value should remain at its default setting of 2347. Should you
encounter inconsistent data flow, only minor modifications are recommended. If a
network packet is smaller than the preset “RTS threshold” size, the RTS/CTS mechanism
will not be enabled. The wireless router sends Request to Send (RTS) frames to a
particular receiving station and negotiates the sending of a data frame. After receiving an
RTS, the wireless station responds with a Clear to Send (CTS) frame to acknowledge the
right to begin transmission.
Fragment Threshold: Fragment Threshold specifies the maximum size of packet during
the fragmentation of data to be transmitted. If you set this value too low, it will result in
bad performance. Enter a value from 256 to 2346.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom WLM-3600 - X3 N300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom WLM-3600 - X3 N300 in the language / languages: English as an attachment in your email.

The manual is 3,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info