Manual Sitecom WLM-2500 - N300 X2 (page 66 of 67) (English)

527722

Zoom out

Zoom in

1/67

Diagnostics

Ping

Once you have your router configured, you can send a ping command to the

host you specify in this page. To use it, you must know the IP address of the

host you are trying to communicate with and enter the IP address in the Host

Address field.

ATM Loopback

In order to isolate the ATM interface problems, you can use ATM OAM loopback

cells to verify connectivity between VP/VC endpoints, as well as segment

endpoints within the VP/VC. This page allows you to use ATM ping to test the

reachable of a segment endpoint or a connection endpoint.

Parameter Description

Select PVC Select the PVC channel you want to do the loop-back diagnostic.

Flow Type The ATM OAM flow type. The selection can be F5 Segment or F5

End-to-End. ATM uses F4 and F5 cell flows as follows:

F4: used in VPs

F5: used in VCs

Loopback

Location ID

The loop-back location ID field of the loop-back cell. The default

value is all 1s (ones) to indicate the endpoint of the segment or

connection.

Click “Start test” to save the setting to the configuration.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom WLM-2500 - N300 X2 in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sitecom WLM-2500 - N300 X2 Manual

Product: