489086

Sitecom WL-610 Wireless Network UMTS Router 54G Manual

51
Zoom out
Zoom in
Previous page
1/65
Next page
Please check www.sitecom.com for up to date drivers & utilities, manuals and support
51
added into the table.
Remove QoS rules from the table If you want to remove some QoS rules from the table,
select the QoS rules you want to remove in the table and
then click "Delete Selected". If you want remove all QoS
rules from the table, just click "Delete All" button. Click
"Reset" will clear your current selections.
Edit a QoS rule Select the rule you want to edit and click “Edit”, then you
will enter the detail form of the QoS rule. Click “Apply”
after editing the form and the rule will be saved.
Adjust QoS rule priority You can select the rule and click “Move Up” to make its
priority higher. You also can select the rule and click “Move
Down” to make its priority lower.
Edit QoS Rule:
You can assign packet classification criteria by its local IP range, remote IP range, traffic type,
protocol, local port range and remote port range parameters. The parameters that you leave
as blank will be ignored. The priority of this rule will be applied to packets that match
classification criteria of this rule. You can limit bandwidth consumed by packets that match
this rule or guarantee bandwidth required by packets that match this rule.
Parameters Description
Rule Name The name of this rule.
Bandwidth You can assign the download or upload bandwidth by the unit of Kbps
(1024 bit per second). You can limit the maximum bandwidth
consumed by this rule by selecting “Maximum”. You also can reserve
enough bandwidth for this rule by selecting “Guarantee”.
Local IP Address Enter the local IP address range of the packets that this rule will apply
to. If you assign 192.168.0.3 – 192.168.0.5, it means 3 IP addresses:
192.168.0.3, 192.168.0.4 and 192.168.0.5
Local Port Range Enter the local port range of the packets that this rule will apply to.
You can assign a single port number here or assign a range of port
numbers by assigning the first port number and the last port number
of the range. The two numbers are separated by a dash “-“, for
example “101-150” means from port number 100 to port number
150 – the range of 50 port numbers.
Remote IP Address Enter the remote IP address range of the packets that this rule will
apply to. If you assign 192.168.2.3 – 192.168.2.5, it means 3 IP
addresses: 192.168.2.3, 192.168.2.4 and 192.168.2.5
Remote Port Range Enter the remote port range of the packets that this rule will apply to.
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom WL-610 Wireless Network UMTS Router 54G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom WL-610 Wireless Network UMTS Router 54G in the language / languages: English as an attachment in your email.

The manual is 2,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info