537199
44
Zoom out
Zoom in
Previous page
1/56
Next page
Parameters Description
Enable/Disable QoS You can check “Enable QoS” to enable QoS function for the
WAN port. You also can uncheck “Enable QoS” to disable
QoS function for the WAN port.
Add a QoS rule into the table ClickAdd” then you will enter a form of the QoS rule. Click
Apply” after filling out the form and the rule will be added
into the table.
Remove QoS rules from the table If you want to remove some QoS rules from the table,
select the QoS rules you want to remove in the table and
then click "Delete Selected". If you want remove all QoS
rules from the table, just click "Delete All" button. Click
"Reset" will clear your current selections.
Edit a QoS rule Select the rule you want to edit and click “Edit, then you
will enter the detail form of the QoS rule. Click “Apply” after
editing the form and the rule will be saved.
Adjust QoS rule priority You can select the rule and click “Move Up” to make its
priority higher. You also can select the rule and click “Move
Down” to make its priority lower.
Edit QoS Rule:
You can assign packet classification criteria by its local IP range, remote IP range, traffic type,
protocol, local port range and remote port range parameters. The parameters that you leave
as blank will be ignored. The priority of this rule will be applied to packets that match
classification criteria of this rule. You can limit bandwidth consumed by packets that match this
rule or guarantee bandwidth required by packets that match this rule.
Parameters Description
44
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom WL-540 - MiMoXR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom WL-540 - MiMoXR in the language / languages: English as an attachment in your email.

The manual is 9,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sitecom WL-540 - MiMoXR

Sitecom WL-540 - MiMoXR Installation Guide - Dutch - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info