489070
49
Zoom out
Zoom in
Previous page
1/58
Next page
SSL If SSL encryption is required to connect to the SMTP server, select
‘Enable’ or SMTP connection may fail; select ‘Disable’ if your SMTP
server doesn’t support SSL encryption. If in doubt, ask your ISP or
mail server’s administrator.
SMTP
Authentication
Some SMTP server requires mail senders to be authenticated before
they can send Email. If your SMTP server requires you to do so,
please select ‘Enable’, or select ‘Disable’ to disable it. If you don’t
know, please refer to the SMTP server you’re using in your Email
software (like Outlook, Outlook Express etc.), or ask your network
administrator or ISP.
User Name Please input the user name of SMTP server here, if your SMTP server
requires the use of authentication.
Password Please input the password of SMTP server here, if your SMTP server
requires the use of authentication.
Click ‘Apply’ to save settings and make the new settings take effect.
After that, you can click ‘Send a test email’ to send a testing Email to the address you set
here, so you can make sure the setting you specified here is correct and working.
3.9.2 FTP Settings
These settings are used to send the captured picture by FTP:
The descriptions of every setting in this menu will be given below:
Item Description
FTP Server Input the IP address or host name of the FTP server you wish to use
here.
FTP Port Input the port number of the FTP server you wish to use here.
User Name Input the user name of the FTP server you wish to use here.
Password Input the password of the FTP server you wish to use here.
Remote Folder Input the remote folder name on the FTP server here. If nothing is
specified here, all uploaded image files will be placed in FTP server’s
root directory.
Please ask FTP server’s administrator to know which folder you
should use. Certain user name may have restrictions and therefore
can not place the file in the directory not owned by the user.
Passive Mode Select ‘Enable’ to use passive mode to send file, or select ‘Disable’ to
not to use passive mode to send file.
Some FTP servers require passive mode, if you don’t know, please
ask FTP server’s administrator; most of FTP servers will work fine
with both modes, but if you found that non-passive mode is not
working, you can try to use passive mode.
Click ‘Apply’ to save settings and make the new settings take effect.
After that, you can click ‘Upload a test file’ to send a file to the FTP server you set here, so
you can make sure the setting you specified here is correct and working.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom WL-405 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom WL-405 in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info