489070
45
Zoom out
Zoom in
Previous page
1/58
Next page
3.8 Wireless Settings
If you wish to use wireless network instead of wired network connection, you have to set
the wireless LAN parameters here.
You can access this menu by clicking ‘Network Setup’ on the top of web management
interface, and opening the 'Wireless Settings' tab.
The descriptions of every setting in this menu will be given below:
Item Description
Self PinCode A random 8-digit code will be displayed here. If the wireless
AP you wish to connect supports WPS-PIN, please input this
code to the AP you wish to connect. This code changes
every time you enter this page.
Configure via
Push Button
If the wireless AP you wish to connect supports push button
WPS configuration, click ‘Start PBC’ and press the WPS
button on the wireless AP to start pairing.
You can also press the ‘WPS / Reset’ button located at the
back of IP camera for the same purpose. DO NOT press and
hold the ‘WPS / Reset’ button for too long. If you press and
hold the ‘WPS / Reset’ button for more than 10 seconds, all
settings in the IP camera will be lost!
Configure via
PinCode
If the wireless AP already generates a 8-digit code, please
input the code here and click ‘Start PIN’ button to start
pairing.
Wireless
Connection
Select ‘Enable’ to activate wireless network function of this
IP camera, select ‘Disable’ to disable it.
Network Type Select the network type of wireless connection.
Available options are ‘Infrastructure’ (Connect the IP
camera to a wireless access point), and ‘Adhoc’ (This IP
camera will become a stand-alone wireless network point,
other wireless computers / devices can discover this IP
camera and connect to it without wireless access point).
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom WL-405 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom WL-405 in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info