462910
52
Zoom out
Zoom in
Previous page
1/73
Next page
WL-308 Gaming Router Full Manual
52
StreamEngine
The StreamEngine feature helps improve the network performance by prioritizing
applications.
Enable Traffic Shaping: Place a check in the box to enable traffic shaping.
When this option is enabled, the router restricts the flow of outbound traffic
so as not to exceed the WAN uplink bandwidth.
Automatic Uplink Speed. Place a check in this box to enable automatic
uplink speed. When enabled, this option causes the router to automatically
measure the useful uplink bandwidth each time the WAN interface is re-
established (after a reboot, for example).
Measured Uplink Speed: Displays the uplink speed. This is the uplink speed
measured when the WAN interface was last re-established. The value may be
lower than that reported by your ISP as it does not include all of the network
protocol overheads associated with your ISP's network. Typically, this figure
will be between 87% and 91% of the stated uplink speed for xDSL
connections and around 5 kbps lower for cable network connections.
Manual Uplink Speed: Specify an uplink speed or select it from the drop-
down list. If Automatic Uplink Speed is disabled, this option allows you to set
the uplink speed manually. Uplink speed is the speed at which data can be
transferred from the router to your ISP.
Connection Type: By default, the router automatically determines whether
the underlying connection is an xDSL/Frame-relay network or some other
connection type (such as cable modem or Ethernet), and it displays the result
as Detected xDSL or Frame Relay Network. If you have an unusual network
connection in which you are actually connected via xDSL but for which you
configure either Static or DHCP in the WAN settings, setting this option to
xDSL or Other Frame Relay Network ensures that the router will recognize
that it needs to shape traffic slightly differently in order to give the best
performance. Choosing xDSL or Other Frame Relay Network causes the
measured uplink speed to be reported slightly lower than before on such
connections, but gives much better results.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom WL-308 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom WL-308 in the language / languages: English as an attachment in your email.

The manual is 4,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info