38870
22
Zoom out
Zoom in
Previous page
1/38
Next page
Action: Define the filter action for the list of MAC addresses in the MAC address
filter table.
Select Deny Association to block access to the router, MAC addresses not listed
will be allowed to access the router. Select Allow Association to permit access to
the router, MAC addresses not listed will be denied access to the router.
MAC Address: Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the
wireless station that are allowed or denied access to the router in these address
fields.
WEP
Key 1 to Key 4: Enter the key to encrypt wireless data. To allow encrypted data
transmission, the WEP Encryption Key values on all wireless stations must be the
same as the router. There are four keys for your selection. The input format is in
HEX style, 5 and 13 HEX codes are required for 64-bitWEP and 128-bitWEP
respectively.
If you chose WEP 64-bits, then enter 10 hexadecimal characters ("0-9
", "A-F").
If you chose WEP 128-bits, then enter 26 hexadecimal characters ("0-9
", "A-F").
You must configure all four keys, but only one key can be activated at any one
time. The default key is key 1.
WPA-PSK
Encryption: TKIP (Temporal Key Integrity Protocol) utilizes a stronger encryption
method and incorporates Message Integrity Code (MIC) to provide protection
against hackers.
Pre-Shared key: The key for network authentication. The input format is in
character style and key size should be in the range between 8 and 64 characters.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom WL-118 Quick Start at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom WL-118 Quick Start in the language / languages: English as an attachment in your email.

The manual is 4,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sitecom WL-118 Quick Start

Sitecom WL-118 Quick Start User Manual - Dutch - 5 pages

Sitecom WL-118 Quick Start User Manual - Italian - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info