38870
23
Zoom out
Zoom in
Previous page
1/40
Next page
WPA fornisce il livello maggiore di sicurezza disponibile. WEP 128 fornirà una
maggiore sicurezza su WEP 64.
È possibile disattivare o attivare con WPA o WEP per la protezione della rete
wireless. Il tipo predefinito di wireless è disabled e per consentire a tutti i
computer wireless di comunicare con i punti di accesso senza crittografia dei dati.
Advanced Setting
Beacon interval: Il valore Beacon Interval indica l'intervallo di frequenza del
segnale. Inserire un valore tra 20 e 1000. Un segnale è un pacchetto
radiotrasmesso dal Router per sincronizzare la rete wireless.
RTS/CTS Threshold: la soglia (numero di byte) RTS (Request To Send) per
l'attivazione dell'handshake RTS/CTS. I dati con una dimensione di cornice
superiore a questo valore eseguiranno l'handshake RTS/CTS. L'impostazione di
tale attributo superiore alla dimensione massima MSDU (MAC service data unit)
disattiverà l'handshake RTS/CTS. L'impostazione di tale attributo su zero attiverà
l'handshake RTS/CTS Inserire un valore compreso tra 1500 e 2347.
Fragmentation Threshold: la soglia (numero di byte) per il limite di
frammentazione per i messaggi diretti. È la massima dimensione di frammento
dati che è possibile inviare. Inserire un valore compreso tra 256 e 2346.
DMIT: questo valore, compreso tra 1 e 255, indica l'intervallo del Delivery Traffic
Indication Message (DTIM).
802.11b/g: l'impostazione predefinita è 802.11b+g (modalità Mixed). Se non si
conosce o non si è in possesso dei dispositivi sia 11g che 11b nella rete,
conservare l'impostazione predefinita nella modalità mixed. Dall'elenco a
discesa, è possibile selezionare 802.11g se si possiede esclusivamente la scheda
11g. Se si possiede esclusivamente la scheda 11b, selezionare 802.11b.
Wireless MAC Address Filter
La schermata MAC filter consente di configurare il router per fornire un accesso esclusivo
a 32 dispositivi al massimo (Allow Association) o di escludere 32 dispositivi al massimo
dall'accesso al router (Deny Association). Ogni dispositivo Ethernet ha un unico indirizzo
MAC (Media Access Control). L'indirizzo MAC è assegnato in fabbrica ed è formato da sei
coppie di caratteri esadecimali, per esempio, 00:AA:BB:11:22:34. Per configurare questa
schermata occorre conoscere l'indirizzo MAC dei dispositivi.
Per modificare le impostazioni MAC filter del router, fare clic su Wireless LAN, MAC Filter
per aprire la schermata MAC Filter. La schermata appare come mostrata.
Active: selezionare Actived per attivare il filtraggio dell'indirizzo MAC.
Action: definire l'azione del filtro per l'elenco degli indirizzi MAC nella tabella del
filtro indirizzi MAC.
Selezionare Deny Association per bloccare l'accesso al router; gli indirizzi MAC
non elencati non potranno accedere al router. Selezionare Allow Association per
consentire l'accesso al router; agli indirizzi MAC non elencati sarà negato l'accesso
al router.
MAC Address: inserire gli indirizzi MAC (nel formato XX:XX:XX:XX:XX:XX) della
stazione wireless che possono accedere al router oppure no in questi campi di
indirizzo.
WEP
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom WL-118 Quick Start at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom WL-118 Quick Start in the language / languages: Italian as an attachment in your email.

The manual is 4,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sitecom WL-118 Quick Start

Sitecom WL-118 Quick Start User Manual - English - 38 pages

Sitecom WL-118 Quick Start User Manual - Dutch - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info