Manual Sitecom MD-394 (page 2 of 10) (English, German, Dutch, French, Italian, Portuguese, Spanish)

729807

Zoom out

Zoom in

1/10

Get to know the docking station Using the docking station with your computer

Using the docking station to clone (duplicate)

hard drives

Top view

HDD B

HDD A

1. Insert your hard disk(s) into the docking station

2. Use the USB cable to connect your docking station to your computer

3. Connect the power adapter to the docking station and the power outlet

4. Press the power button to turn the docking station on

1. Disconnect the docking station from your PC

2. Insert the hard disk that contains your data into slot A (source)

3. Insert an empty hard disk into slot B (target)

! Target hard disk need to be the same size or larger than source hard disk

4. Connect the power adapter to the docking station and the power outlet

5. Press the power button to turn the docking station on

6. Wait for 10 seconds for the docking station to boot up

7. Press the clone button for 3 seconds

8. Check the status-LEDs indicators to see the progress:

1 LED solid: 25% done

2 LEDs solid: 50% done

3 LEDs solid: 75% done

4 LEDs solid: 100% done

9. Wait until all 4 LEDs are solid. Press the power button to turn off the

docking station.

10. Take out the hard drives carefully, hard drives may be hot.

Front view

Back view

Slot A (Source)

Slot B (Target)

Status-LEDs

Clone button

USB 3.0 port

Power Adapter

On/Off switch

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom MD-394 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sitecom MD-394 Manual

Product: