505701
16
Zoom out
Zoom in
Previous page
1/28
Next page
wireless performance will be depending on the strength of your Wireless module in your
home router. Please make sure that the signal between your home router (N-type router
recommended) and the PConTV device is good to ensure good performance.
Check the <Enable> button to activate AP-Client mode. Click on the magnifier glass to
search for your home router SSID. Click OK to save the settings.The PConTV will reboot
and connect to your home WiFi router (It may take 30-40 seconds for the PConTV to
retrieve an IP address from your home router. Your home router needs to be able to
deliver IP addresses to clients in DHCP mode (most routers are in DHCP mode by
default).
When your router is set to only work with Static IP addresses you can configure the
PConTV with a static IP address through the device management webpage under the tab
Network Setup. When there is no IP addresses delivered to the PConTV (as presented in
the lower left corner on the TV startup screen) the quality of signal of your home router
may be too low. In this case try to setup the PConTV in a wired setup (using Ethernet
cable or power line modem to connect to your home router). When the PConTV is
wirelessly connected to your home router successfully you need to reconnect to the
PConTV from the PConTV Software user interface using the same password as your
home WiFi router when asked for a password.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom MD-300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom MD-300 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info