541431

Sitecom LN-550 Manual

13
Zoom out
Zoom in
Previous page
1/18
Next page
Full manual Sitecom homeplug
13
6.2 Add an extra Homeplug
First, clear the original network group of the extra HomePlug by pressing its
GROUP button for 10 seconds. On release, all LED lights simultaneously turn off
and on once. At this moment, its network group name has been changed to a
random name and is ready to be assigned another network name.
Next, press the GROUP button of the extra HomePlug and the GROUP button on a
HomePlug that is already connected to the network for 2 to 3 sec (make sure the
POWER LED starts blinking). It doesn’t matter which device’s button is pushed
earlier than the other, but please push the second device’s Group button within
two minutes after pushing the first device’s Group button. This way, the extra
HomePlug joins the same encrypted network as the rest.
6.3 Remove a device from a network Group
If for example, device A and device B are in the same logical network group and
you want to remove device A from this logical network group, just press the
GROUP button of device A for 10 seconds. This makes device A unable to
communicate with device B.
6.4 Make two public network devices private
If you want to make two new public devices (network name HomePlugAV) to
become private, please carry out Step 1 on both devices, then do step 2 on
these two devices. Finally, a private random network name is generated for
these two devices.
6.5 Standby Mode
The standby mode enables the Homeplug to save power consumption. The
Homeplug automatically enters standby if no Ethernet cable is connected, or the
connected device enters standby, hibernation, or is powered-off for over two
minutes. During standby, only the POWER LED blinks at a slow rate. To exit
standby, just insert the Ethernet cable to the Homeplug, or wake up the
connected device.
Note: Some computers support the Wake on LAN function that may
cause the Homeplug not to enter the standby mode.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom LN-550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom LN-550 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info