430488
74
Zoom out
Zoom in
Previous page
1/81
Next page
DC-202 xDSL/Cable Broadband router
74
If the MAC address is changed, the DC-
202 must restart.
Routing
Overview
If you don't have other Routers or Gateways on your LAN, you can
ignore the "Routing" page completely.
If the DC-202 is only acting as a Gateway for the local LAN segment,
ignore the "Routing" page even if your LAN has other Routers.
If your LAN has a standard Router (e.g. Cisco) on your LAN, and the
DC-202 is to act as a Gateway for all LAN segments, enable RIP (Rout-
ing Information Protocol) and ignore the Static Routing table.
If your LAN has other Gateways and Routers, and you wish to control
which LAN segments use each Gateway, do NOT enable RIP (Routing
Information Protocol). Configure the Static Routing table instead. (You
also need to configure the other Routers.)
If using Windows 2000 Data center Server as a software Router, enable
RIP on the DC-202, and ensure the following Windows 2000 settings
are correct:
Open Routing and Remote Access
In the console tree, select Routing and Remote Access , [server name],
IP Routing, RIP
In the "Details" pane, right-click the interface you want to configure for
RIP version 2, and then click "Properties".
On the "General" tab, set Outgoing packet protocol to "RIP version 2
broadcast", and Incoming packet protocol to "RIP version 1 and 2".
Routing Screen
The routing table is accessed by the Routing link on the Administration
menu.
Using this Screen
Generally, you will use either RIP (Routing Information Protocol) OR the
Static Routing Table, as explained above, although is it possible to use
both methods simultaneously.
Static Routing Table
If RIP is not used, an entry in the routing table is required for each LAN
segment on your Network, other than the segment to which this device
is attached.
The other Routers must also be configured. See Configuring Other
Routers on your LAN later in this chapter for further details and an ex-
ample.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sitecom broadband xdsl cable router w 4p switch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sitecom broadband xdsl cable router w 4p switch in the language / languages: English as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info