616322
4
Zoom out
Zoom in
Previous page
1/14
Next page
PRINCIPAL PARTS OF THE MACHINE (Machine Back View)
NAME OF PARTS
PRINCIPAL PARTS AND WHAT THEY DO
Thread Tension Dial lets you select just the right tension for your stitch, thread and
fabric. Tension discs, inside the machine, regulate the amount of tension on the needle
thread. The thread tension dial is numbered from 1 through 9. The lower the number,
the looser the tension is on the needle thread. The higher the number, the tighter the
tension is on the needle thread. The settings of 3, 4 and 5 are marked with a box around
the number, indicating the settings at the range at which most of your sewing will be
done.
Thread Take-Up Lever controls the flow of the needle thread. The self threading
eyelet simplifies the threading of the take up lever.
Thread Cutter is built-in at the side of the machine for convenience. Use this to trim
thread tails quickly and easily when completing a seam.
Reverse Lever instantly reverses the stitching direction. Simply press the lever all
the way down and hold in place. Release it to resume sewing forward.
Presser Foot holds the fabric against the feed dogs. Use the presser foot lifter to lower
the presser foot to sew or to raise the presser foot to remove fabric.
Needle Plate is located under the presser foot area, around the feed dogs. It provides
a flat surface for the fabric while sewing.
Removable Extension Bed provides a larger surface around the arm of the machine
to support fabric while sewing. It can be removed to access the free arm, making it
possible to sew smaller, more hard-to-reach areas such as pant or sleeve hems. It has
a storage compartment for the machine's accessories, keeping them at your fingertips.
Bobbin Winding Stopper is used in the process of winding the bobbin.
Power On/Off & Speed Control Switch is used to turn the machine on and off.
There is an “L” setting for lower speed, and an “H” setting for higher speed.
Pattern Selector Dial is used to set the machine for the stitch you want to sew. It is
numbered from 1 through 12, and the numbers correspond to the display near the top of
the machine. Just turn the dial to the stitch you want and sew.
Presser Foot Release Lever is located at the back of the presser foot holder. Use
this lever to remove the presser foot from the presser foot holder.
Needle is placed into the needle bar, and is required in order for the machine to
sew. Use only SINGER brand needles for best stitch results.
Needle Clamp & Screw work together to hold the needle in place for sewing.
Presser Bar holds the presser foot and presser foot holder. It is raised and lowered
using the presser foot lifter.
Presser Foot Holder is attached to the presser bar. It holds the presser foot in
place for sewing.
Presser Foot Screw is located to the left of the presser foot holder. The screw is
used to secure the presser foot holder in position on the presser bar.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
26
27
30
20
21
23
24
25
22
32
28
31
29
6
5
20. Spool pin
21. Bobbin winder
22. Carry handle
23. Hand wheel
24. Foot controller input
25. Power cord socket
26. Power cord
27. Foot controller
28. Presser foot lifter
29. Light switch & built-in
sewing light
30. Faceplate
31. Thread spool
32. Bobbin
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer Vivo -1004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer Vivo -1004 in the language / languages: English as an attachment in your email.

The manual is 4,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info