617395
58
Zoom out
Zoom in
Previous page
1/75
Next page
58
Shell Tucking
Machine Setting
Stitch pattern: 06 (Mode 3)
Thread tension: 6-8
Presser foot: Satin stitch foot F
Foot pressure: 3
Increase the needle thread tension to “6-8”. Fold and
stitch on the bias of woven fabrics. This technique works
well on stretch fabrics, also. On stretch fabrics sew the
shell across the greatest stretch of the fabric. Place the
folded edge of the fabric along the slit of the foot. The right
swing of the needle when stitching should fall off the edge
of fabric fold. The tight tension with the right swing of the
needle creates the tucks.
Scallop Stitch
This stitch pattern is a great finish on delicate fabrics. A
popular finish for edges on hems, sashes, curtains and
delicate heirloom projects.
Machine Setting
Stitch pattern: 08 (Mode 3)
Thread tension: 3-6
Presser foot: General purpose foot A
Foot pressure: 3
Stitch pattern 24 also makes nice scallops. This stitch
works well on woven fabric. Positioning a strip of tear-a-
way stabilizer under the fabric will produce a better result.
Sew along the row edge leaving a 3/8” (1cm) seam
allowance. After sewing, trim the fabric edge close to
stitching. Take care not to cut stitches.
Cording
This stitch pattern combined with cording, creates beautiful
couching. The grooves on top of the foot allow you to
stitch precisely over the cords. The cords will naturally
feed evenly under the spring grooves. Experiment with
other stitch patterns to be even more creative. Sewing
over a single cord with a long zigzag can be used to gather
heavier fabrics.
Machine Setting
Stitch pattern: 22 (Mode 3)
Thread tension: 1-4
Presser foot: Cording foot H
Foot pressure: 3
Attach the cording foot H.
3-strand cording
Insert 3 strands of cording under the spring of the foot and
draw them under the foot to the rear.
Hold the three strands parallel for even sewing and be
sure to sew over the strands. Stitch slowly and smoothly,
guiding the fabric as you sew.
1 Spring
Single strand cording
Use the center slot on the foot to hold the cording.
Select stitch pattern 08 in the Mode 1 and adjust the stitch
width to match the thickness of the cord.
1
Fold is on bias
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer S18 Studio at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer S18 Studio in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info