617395
27
Zoom out
Zoom in
Previous page
1/75
Next page
27
4
1
2
3
BASIC STITCHES (Mode 1)
Straight Stitch 01
Machine Setting
Stitch pattern: 01 (Mode 1)
Thread tension: 2-6
Presser foot: General purpose foot A
Foot pressure: 3
How to sew with the straight stitch
Raise the presser foot and position the fabric next to the
desired seam guide line on the needle plate. Lower the
needle into the fabric where you wish to start sewing.
Pull the needle and bobbin threads under the bottom of the
foot to the back of the machine. Lower the presser foot.
Depress the foot control to start sewing. Gently guide the
fabric along the seam guide line. Let the presser foot and
feed dogs naturally pull the fabric while sewing.
How to start stitching on the edge of thick fabrics
Starting to sew on heavy fabrics at the beginning of a seam
can cause the foot to stall and prevent even feeding of the
fabric. The black button found on the zigzag foot helps by
locking the foot into a horizontal position.
This button will also help when stitching over thick seams
when hemming.
Start with the presser foot up. Lower the needle into the
fabric at the point where you wish to start sewing.
Lower the foot while pushing the black button in. The foot
is now locked in the horizontal position the foot will grab the
fabric and move the stitching forward.
1 Thick fabrics
2 Black button
Securing seams
For securing the ends of seams, press the reverse button
and sew several reverse stitches.
The machine sews in reverse as long as you press and
hold the reverse button in.
Press the reverse button once when sewing the stitch
(pattern 03) or locking stitch (pattern 04) found in Mode 1.
The machine will lock the stitch off and stop automatically.
When machine stops select the needle down button and
press the thread cutter button to trim the threads.
3 Thread cutter button
NOTE
Avoid using the automatic thread cutter when the needle is
in the up position. The needle may come unthreaded and
the thread spools may spin causing thread to spool off.
Use the thread cutter on the face plate to cut the specialty
threads or heavy weight threads.
4 Thread cutter on face plate
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer S18 Studio at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer S18 Studio in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info