616508
28
Zoom out
Zoom in
Previous page
1/56
Next page
28
w r
e
Step
z
Raise the presser foot. Check that the machine has
not run out of bobbin thread. Rewind bobbin if
needed and replace in bobbin case.
Check that the thread is feeding evenly off of the
thread spool and re-thread the needle.
If the carriage position makes threading the needle
difficult, you can move the hoop for easier
threading by pressing the home position button
q
.
After rethreading the needle thread, press the
home position button
q
again to return the carriage
to the previous position.
q
Home position button
Step
x
Press the stitch back button
w
or stitch forward button
r
to move the embroidery hoop to where the thread
broke or quit stitching
e
. Press the stitch back
once
w
to move the hoop back by 10 stitches.
w
Stitch back button
e
Point of thread breakage
r
Stitch forward button
When embroidering a design, thread breakage can
occur. Also, the bobbin may run out of thread before the
design is finished.
Follow these steps to re-thread the machine and return
the needle to the position where stitching should resume.
q
Needle or Bobbin Thread Breaks
Step
v
Lower the presser foot. Press the start/stop button
and sew 5 to 6 stitches.
Step
b
Press the start/stop button again to stop the
machine. Raise the presser foot. Trim the thread tail
at the beginning of the stitching.
Step
n
Lower the presser foot and press the start/stop
button. The machine will sew the first color section
and stop automatically when it has finished.
Step
m
Select OK
and change the thread to its next color.
Sew the next section.
Step
,
Continue sewing and changing threads until the
design is finished. The machine will buzz when
design is complete. Select the OK
button to return
to the beginning of design.
Step
.
Select the exit X button to return to the design
selection screen.
vbn
m,.
zx
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Singer S10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Singer S10 in the language / languages: English as an attachment in your email.

The manual is 12,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info