50
For sewing three cords
Pass all cords in cording foot and insert top ends of cords
through grooves located on sole of foot. Then, lower
cording foot.
For sewing one cord
Pass cord along left edge of cording foot and pass top of
cord through the groove located on sole of foot. Then,
lower cording foot.
Secure cord with zigzag stitches of zigzag width (2).
Press reverse stitch button at beginning and end of
sewing to perform back taking.
Pull cord onto wrong side of fabric, make a knot and
trim.
Secure cords with Multistitch zigzag stitches. As in the
case of one cord sewing, perform back taking and draw
cords onto wrong side of fabric, make a knot and cut
cords properly.
* For sewing two pieces of cord, pass cords through right
and left grooves located on sole of cording foot.
Cord
Spring
Cord
Spring
Attaching Cords
Stitch pattern
to be selected
Presser foot to
be selected
Cording foot (H)
For one cord
(Manual zigzag
stitch width 1.0~2.0)
For three
cords
* Gathering and shirring
Place pearl cotton into center of foot and zig-zag over it.
Secure one end of pearl cotton and pull other end to gather.
Use same method with elastic threads to create shirring.
* Decorative shirring
Experiment with decorative threads, like ribbon thread or metallics.
Place cording into slots and stitch using multi-stitch zigzag.
* Applying trims.
