16
1 324
* Cut thick thread or special-
purpose thread with a pair
of scissors.
Press Thread Trimming
Button. * Raise presser foot lifter.
Needle moves until its
upper position is reached.
Both needle thread and
bobbin thread are
trimmed. Now, you can
take out your finished
fabric.
Press Reverse Stitch Button. Begin sewing. Press Reverse Stitch Button.
1
Seams and stitches
will not pull apart if
reverse stitches are
sewn at the start and
end of the sewing.
* Sewing machine will continue reverse stitching as long as reverse stitch button is pressed.
* Sewing machine sews reverse stitching at a low speed.
* In the case of pattern sewing such as zigzag stitching, machine will perform back tacking.
23
Automatic back tacking
Automatic thread trimming after completion of sewing:
Reverse stitching (back tacking)
Fabric
[1]
[2]
[3]
After automatic thread
trimming, it is not necessary to
bring the bobbin thread up to
the top.
If you have not already tried playing with the Pictogram Pattern Screens...... this would be a great time
to take a quick peek at the vast assortment of Stitch Patterns. Just see and touch the pictograms to
change groupings and select Stitch Patterns. Please note all the stitch patterns are grouped by
general function and are color coded for easy identification:
* Utitlity Pattern are grouped on 4 screens and are color coded green.
* Continuous Functional and Decorative Patterns are grouped on 10 screens and are color coded
rose.
* Large (X-Y Feed) Decorative Patterns are grouped on 6 screens and are color coded orange.
* Small Decorative Patterns are grouped on 4 screens and are color coded purple.
* All Alphabet and Numeric Screens are grouped by fonts on 25 screens and are color coded blue.
In the case where machine is operated after pictogram has been pressed, machine will
sew reverse stitching (back tacking) of three stitches, then start normal stitching.
When seam end is reached, press reverse stitch button. Then, machine will sew reverse stitching
(back tacking) of three stitches, automatically cut the thread and stop.
(See page 29.)
