12
2
3
Stage Thread
for Automatic
Threading .
Install Thread Spools.
1
2
3
1
Install Thread
Exchanger.
Large
cap
Place thread so thread wraps
around spool in a clockwise
direction and put large cap
onto thread spool.
In case
of normal
thread
spool
Place thread so thread wraps
around spool in a clockwise
direction and put large cap
onto thread spool after
installing inner cap.
Place thread so thread
wraps around spool in a
clockwise direction and
put small cap onto
thread spool.
Large
cap
Small
cap
inner cap
Lever
Thread sewing machine
along groove, pull it in
direction of arrow and cut
it with thread cutter blade.
4 56
Lower presser foot.
Press key.
Press rewind switch to
automatically rewind thread.
Holding thread with fingers, pull
thread so as to stretch thread tight.
Stretch
thread tight.
* When sewing embroidery,
please see page 63,64.
Thread Exchanger (Standard Machine)
Projection
Groove
Press pictogram.
In case
of large
thread
spool
In case
of small
thread
spool
Left thread
spool
Right
thread
spool
Press picto to rewind thread to left thread spool.
Press picto to rewind thread to right thread spool.
* Press rewind picto after confirming that thread is cut.
* Do not touch needle thread
rewind device during rotation.
* When the Thread Exchanger
stops during re-winding, turn
the power to the machine off,
confirm the setting of the
thread and then turn the power
back on.
Thread
Cutter
Blade
*Occasionally when using small spools of thread, the last 10 ~ 15% of thread will not
reel off smoothly. When this occurs, use the Auxiliary Spool Pin. Mount the Spool Pin
on the Accessory Bobbin Winder Shaft and install on machine.