Manual Singer Quantum 9940 (page 34 of 96) (English, French, Spanish)

467663

Zoom out

Zoom in

1/96

C.TURNING CORNERS

1. Stop the machine when you reach a corner.

2. Lower needle into the fabric.

To lower the needle, press the needle up/down

button or turn the handwheel toward you.

When you lower the needle by pressing needle

up/down button, machine will stop in down

position from next stitch.

3. Raise the presser foot.

4. Use the needle as a pivot and turn fabric.

5. Lower the presser foot and resume sewing.

D.SEWING HEAVY FABRIC

When sewing heavy fabrics, the toe end of presser

foot tends to lift up and sewing cannot be started

smoothly. In such case, set as follows.

1. Raise the presser foot.

2. Push the button located on the right side of

general purpose foot and lower the foot.

3. Start sewing.

As presser foot hinge is locked, fabric will be

feeded smoothly.

a. The presser bar lifter can be raised 1step

higher for placing heavy materials under the

presser foot easily.

F.WIDTH OF SEAM ALLOWANCE

Guide lines on the needle plate indicate the

distance from the center needle positon.

To keep the width of seam allowance, guide fabric

edge aligning this guide line.

Seam Guide

Use the seam guide to guide the fabric.

Attach the seam guide and screw to the needle

plate.

E.SEWING OVER OVERLAPPED AREAS

Guide the fabric with your hand when sewing over

overlapped areas.

9940EFSt.pm6 2003.9.10, 8:31 PM34

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Singer Quantum 9940 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Singer Quantum 9940 Manual

Product: